GM1 21L.A.273(e) Production control system

• ED Decision 2023/013/R found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

GM1 21L.A.273(e) Production control system ED Decision 2023/013/R PROCEDURES FOR THE PRODUCTION DATA (a)     When a natural or legal person that produces under Subpart R develops its own manufacturing data from the design data package delivered by a declarant of design compliance, the procedures should ensure the correct transcription of the original design data. (b)     The procedures should define the manner in which applicable design data is used to issue and update the production/inspection data, which determines the conformity of products and parts. These procedures should also define the traceability of such data to each individual product or part for the purpose of stating the condition for safe operation and for issuing a statement of conformity (EASA Form 52B) or an EASA Form 1. (c)      During execution, all work performed should be accompanied by documentation that gives either directly or by means of appropriate references the description of the work as well as the identification of the personnel in charge of inspection and execution of the tasks for each of the different work phases. ##### GM1 21L.A.273(e) Production control system *ED Decision 2023/013/R* **PROCEDURES FOR THE PRODUCTION DATA** (a) When a natural or legal person that produces under Subpart R develops its own manufacturing data from the design data package delivered by a declarant of design compliance, the procedures should ensure the correct transcription of the original design data. (b) The procedures should define the manner in which applicable design data is used to issue and update the production/inspection data, which determines the conformity of products and parts. These procedures should also define the traceability of such data to each individual product or part for the purpose of stating the condition for safe operation and for issuing a statement of conformity (EASA Form 52B) or an EASA Form 1. (c) During execution, all work performed should be accompanied by documentation that gives either directly or by means of appropriate references the description of the work as well as the identification of the personnel in charge of inspection and execution of the tasks for each of the different work phases.