Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
GM1 21L.A.252(b)(2) Identification of parts
Available versions for ERULES-1963177438-22124
ED Decision 2023/013/R
found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)
From
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
From section
To
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
GM1 21L.A.252(b)(2) Identification of parts ED Decision 2023/013/R It is not the intent of point [21L.A.252](#_DxCrossRefBm1649098019)(b)(2) to introduce an obligation for an approved production organisation, declared production organisation or a natural or legal person who produce under subpart R to mark new parts with information which is not identified by the design approval holder or declarant. Therefore, the physical marking of parts is only required when established by the design approval (TC, STC, repair, change) holder or declarant.
##### GM1 21L.A.252(b)(2) Identification of parts *ED Decision 2023/013/R* It is not the intent of point [21L.A.252](#_DxCrossRefBm485231515)(b)(2) to introduce an obligation for an approved production organisation, declared production organisation or a natural or legal person who produce under subpart R to mark new parts with information which is not identified by the design approval holder or declarant. Therefore, the physical marking of parts is only required when established by the design approval (TC, STC, repair, change) holder or declarant.