GM1 21L.A.126(a) Scope of work

• ED Decision 2023/013/R found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

GM1 21L.A.126(a) Scope of work ED Decision 2023/013/R CONFORMITY OF PROTOTYPE MODELS AND TEST SPECIMENS Points [21L.A.25](#_DxCrossRefBm1649097803)(c) and [21L.A.44](#_DxCrossRefBm1649097841)(d) require the determination of conformity of prototype models and test specimens to the applicable design data. The EASA Form 1 may be used as a conformity certificate as part of the assistance that a declared production organisation provides to a design approval holder/applicant or a declarant of a declaration of design compliance. The EASA Form 1 should only be used for conformity release purposes when it is possible to indicate (in Block 12) the reason that prevents its issuance for airworthiness release purposes. ##### GM1 21L.A.126(a) Scope of work *ED Decision 2023/013/R* **CONFORMITY OF PROTOTYPE MODELS AND TEST SPECIMENS** Points [21L.A.25](#_DxCrossRefBm485231299)(c) and [21L.A.44](#_DxCrossRefBm485231337)(d) require the determination of conformity of prototype models and test specimens to the applicable design data. The EASA Form 1 may be used as a conformity certificate as part of the assistance that a declared production organisation provides to a design approval holder/applicant or a declarant of a declaration of design compliance. The EASA Form 1 should only be used for conformity release purposes when it is possible to indicate (in Block 12) the reason that prevents its issuance for airworthiness release purposes.