21L.B.84 Issuance of an approval of a major change to a type certificate

• Regulation (EU) 2022/1358 found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

21L.B.84 Issuance of an approval of a major change to a type certificate Regulation (EU) 2022/1358 (a)     The Agency shall approve the major change when: 1.       the applicant has demonstrated that the change and the areas affected by the change comply with the type-certification basis and the applicable environmental protection requirements, as established and designated by the Agency in accordance with point [21L.B.81](#_DxCrossRefBm1649097886); 2.       the applicant has demonstrated and declared compliance in accordance with point (f)     of point [21L.A.66](#_DxCrossRefBm1649097887); 3.       the Agency through its verification of the demonstration of compliance has not found: (i)      any non-compliances with the type-certification basis or, where applicable, with the applicable environmental protection requirements; (ii)     any feature or characteristic of the change that may make the changed product unsafe or environmentally incompatible for the uses for which certification is requested. (b)     An approval of a major change to a type certificate shall be limited to the specific configuration(s) in the type certificate to which the change relates. #### 21L.B.84 Issuance of an approval of a major change to a type certificate *Regulation (EU) 2022/1358* (a) The Agency shall approve the major change when: 1. the applicant has demonstrated that the change and the areas affected by the change comply with the type-certification basis and the applicable environmental protection requirements, as established and designated by the Agency in accordance with point [21L.B.81](#_DxCrossRefBm485231382); 2. the applicant has demonstrated and declared compliance in accordance with point (f) of point [21L.A.66](#_DxCrossRefBm485231383); 3. the Agency through its verification of the demonstration of compliance has not found: (i) any non-compliances with the type-certification basis or, where applicable, with the applicable environmental protection requirements; (ii) any feature or characteristic of the change that may make the changed product unsafe or environmentally incompatible for the uses for which certification is requested. (b) An approval of a major change to a type certificate shall be limited to the specific configuration(s) in the type certificate to which the change relates.