Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
21L.A.10 Access and investigation
Available versions for ERULES-1963177438-21198
Regulation (EU) 2022/1358
found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)
From
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
From section
To
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
21L.A.10 Access and investigation Regulation (EU) 2022/1358 All natural or legal persons who hold or who have applied for a type certificate, supplemental type certificate, major repair design approval, permit to fly, certificate of airworthiness, restricted certificate of airworthiness, noise certificate or restricted noise certificate, who have declared design compliance, who have declared their design or production capability or who produce aircraft, engines, propellers or parts under [Subpart R](#_DxCrossRefBm1649097705) of this Annex, shall: (a) grant the competent authority access to any facility, product, part, document, record, data, processes, procedures or any other material, and permit the review of any report and make any inspection and perform or witness any test that is necessary to verify the compliance and the continued compliance with the applicable requirements of this Section; (b) if the natural or legal person uses partners, suppliers or subcontractors, make arrangements with them to ensure that the competent authority has access and can investigate as described in point (a).
#### 21L.A.10 Access and investigation *Regulation (EU) 2022/1358* All natural or legal persons who hold or who have applied for a type certificate, supplemental type certificate, major repair design approval, permit to fly, certificate of airworthiness, restricted certificate of airworthiness, noise certificate or restricted noise certificate, who have declared design compliance, who have declared their design or production capability or who produce aircraft, engines, propellers or parts under [Subpart R](#_DxCrossRefBm485231201) of this Annex, shall: (a) grant the competent authority access to any facility, product, part, document, record, data, processes, procedures or any other material, and permit the review of any report and make any inspection and perform or witness any test that is necessary to verify the compliance and the continued compliance with the applicable requirements of this Section; (b) if the natural or legal person uses partners, suppliers or subcontractors, make arrangements with them to ensure that the competent authority has access and can investigate as described in point (a).