21L.A.210 Obligations of a holder of a repair design approval

• Regulation (EU) 2022/1358 found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

21L.A.210 Obligations of a holder of a repair design approval Regulation (EU) 2022/1358 The holder of a repair design approval shall: (a)     if they are not the type-certificate or supplemental type-certificate holder, and certification data has been supplied in accordance with [21L.A.205](#_DxCrossRefBm1649098091) (b)(5), establish an arrangement with the relevant holder; (b)     provide to the organisation performing the repair all the necessary instructions to install or embody the repair design; (c)      support any production organisation producing parts for the repair design, and ensure that those parts are produced using production data that is based upon the design data that is provided by the repair design approval holder; (d)     ensure that the repair design includes all the necessary instructions and limitations, if a repair design is approved subject to limitations. These instructions and limitations shall be transmitted to the operator by the holder of the repair design approval in accordance with a procedure agreed with the Agency; (e)     undertake the obligations of a repair design approval holder of [Subpart A](#_DxCrossRefBm1649097702) of this Annex. #### 21L.A.210 Obligations of a holder of a repair design approval *Regulation (EU) 2022/1358* The holder of a repair design approval shall: (a) if they are not the type-certificate or supplemental type-certificate holder, and certification data has been supplied in accordance with [21L.A.205](#_DxCrossRefBm485231588) (b)(5), establish an arrangement with the relevant holder; (b) provide to the organisation performing the repair all the necessary instructions to install or embody the repair design; (c) support any production organisation producing parts for the repair design, and ensure that those parts are produced using production data that is based upon the design data that is provided by the repair design approval holder; (d) ensure that the repair design includes all the necessary instructions and limitations, if a repair design is approved subject to limitations. These instructions and limitations shall be transmitted to the operator by the holder of the repair design approval in accordance with a procedure agreed with the Agency; (e) undertake the obligations of a repair design approval holder of [Subpart A](#_DxCrossRefBm485231198) of this Annex.