21L.A.209 Approval of a repair design under a privilege

• Regulation (EU) 2022/1358 found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

21L.A.209 Approval of a repair design under a privilege Regulation (EU) 2022/1358 (a)     The approval of a repair design that it has designed may be issued by an approved design organisation without an application according to point [21L.A.205](#_DxCrossRefBm1649098091) in accordance with the scope of its privileges provided for in points (2) and (5) of point [21.A.263](#_DxCrossRefBm1649096918)(c) of Annex I (Part 21) instead of the Agency, as recorded in the terms of approval. (b)     When issuing a repair approval in accordance with point (a), the design organisation shall: 1.       ensure that all the substantiation data and justifications are available; 2.       ensure that the compliance of the change with the type-certification basis and the applicable environmental protection requirements according to point (a)of point [21L.A.207](#_DxCrossRefBm1649098088) or point (a) of point [21L.A.208](#_DxCrossRefBm1649098087) has been demonstrated and declared in accordance with point [21L.A.206](#_DxCrossRefBm1649098050); 3.       confirm that it has not found: (i)      any non-compliances with the type-certification basis or, where applicable, with the applicable environmental protection requirements, or with the certification specifications chosen; (ii)     any feature or characteristic of the repair that may make the changed product unsafe or environmentally incompatible for the uses for which certification is requested; 4.       limit the approval of a repair to a type certificate to the specific configuration(s) in the type certificate to which the repair relates. #### 21L.A.209 Approval of a repair design under a privilege *Regulation (EU) 2022/1358* (a) The approval of a repair design that it has designed may be issued by an approved design organisation without an application according to point [21L.A.205](#_DxCrossRefBm485231588) in accordance with the scope of its privileges provided for in points (2) and (5) of point [21.A.263](#_DxCrossRefBm485230409)(c) of Annex I (Part 21) instead of the Agency, as recorded in the terms of approval. (b) When issuing a repair approval in accordance with point (a), the design organisation shall: 1. ensure that all the substantiation data and justifications are available; 2. ensure that the compliance of the change with the type-certification basis and the applicable environmental protection requirements according to point (a)of point [21L.A.207](#_DxCrossRefBm485231585) or point (a) of point [21L.A.208](#_DxCrossRefBm485231584) has been demonstrated and declared in accordance with point [21L.A.206](#_DxCrossRefBm485231547); 3. confirm that it has not found: (i) any non-compliances with the type-certification basis or, where applicable, with the applicable environmental protection requirements, or with the certification specifications chosen; (ii) any feature or characteristic of the repair that may make the changed product unsafe or environmentally incompatible for the uses for which certification is requested; 4. limit the approval of a repair to a type certificate to the specific configuration(s) in the type certificate to which the repair relates.