21L.A.208 Requirements for the approval of a major repair design

• Regulation (EU) 2022/1358 found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

21L.A.208 Requirements for the approval of a major repair design Regulation (EU) 2022/1358 In order to be issued with an approval of a major repair design to a type-certified product, the applicant shall: (a)     demonstrate that the repair design and the areas affected by the repair design comply with the type‑certification basis and the applicable environmental protection requirements as established and notified to the applicant by the Agency in accordance with point [21L.B.201](#_DxCrossRefBm1649098008); (b)     demonstrate compliance in accordance with point [21L.A.206](#_DxCrossRefBm1649098050); (c)      if the applicant has specified that they provided certification data on the basis of an arrangement with the owner of the type-certification data in accordance with point [21L.A.205](#_DxCrossRefBm1649098091)(b)(5), demonstrate that the type-certificate holder: 1.       has no technical objection to the information submitted under point [21L.A.205](#_DxCrossRefBm1649098091); and 2.       has agreed to collaborate with the applicant to ensure the discharge of all the obligations for continued airworthiness of the repaired product through compliance with points [21L.A.28](#_DxCrossRefBm1649097823) and [21L.A.88](#_DxCrossRefBm1649097931); (d)     demonstrate that there are no unresolved issues from the physical inspection of the first article of that product with the repair design in the final changed configuration carried out by the Agency in accordance with point [21L.A.206](#_DxCrossRefBm1649098050)(e)(3). #### 21L.A.208 Requirements for the approval of a major repair design *Regulation (EU) 2022/1358* In order to be issued with an approval of a major repair design to a type-certified product, the applicant shall: (a) demonstrate that the repair design and the areas affected by the repair design comply with the type‑certification basis and the applicable environmental protection requirements as established and notified to the applicant by the Agency in accordance with point [21L.B.201](#_DxCrossRefBm485231504); (b) demonstrate compliance in accordance with point [21L.A.206](#_DxCrossRefBm485231547); (c) if the applicant has specified that they provided certification data on the basis of an arrangement with the owner of the type-certification data in accordance with point [21L.A.205](#_DxCrossRefBm485231588)(b)(5), demonstrate that the type-certificate holder: 1. has no technical objection to the information submitted under point [21L.A.205](#_DxCrossRefBm485231588); and 2. has agreed to collaborate with the applicant to ensure the discharge of all the obligations for continued airworthiness of the repaired product through compliance with points [21L.A.28](#_DxCrossRefBm485231319) and [21L.A.88](#_DxCrossRefBm485231427); (d) demonstrate that there are no unresolved issues from the physical inspection of the first article of that product with the repair design in the final changed configuration carried out by the Agency in accordance with point [21L.A.206](#_DxCrossRefBm485231547)(e)(3).