21L.A.205 Application for the approval of a repair design to a type-certified product

• Regulation (EU) 2022/1358 found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

21L.A.205 Application for the approval of a repair design to a type-certified product Regulation (EU) 2022/1358 (a)     An application for an approval of a repair design to a type-certified product shall be made in a form and manner established by the Agency. (b)     For the approval of a major repair design, the applicant shall include in the application, or submit after the initial application, a compliance demonstration plan: 1.       containing a description of the damage and the repair design, identifying the configuration of the type design upon which the repair design is made; 2.       identifying all the areas of the type design and the approved manuals that are changed or affected by the repair design; 3.       identifying any reinvestigations necessary to demonstrate the compliance of the repair design and the areas affected by the repair design with the type-certification basis and the applicable environmental protection requirements, incorporated by reference in, as applicable, either the type certificate or the supplemental type certificate; 4.       identifying any proposed amendments to the type-certification basis incorporated by reference in, as applicable, either the type certificate or supplemental type certificate; 5.       specifying whether the certification data has been or will be prepared completely by the applicant or on the basis of an arrangement with the owner of the type-certification data. #### 21L.A.205 Application for the approval of a repair design to a type-certified product *Regulation (EU) 2022/1358* (a) An application for an approval of a repair design to a type-certified product shall be made in a form and manner established by the Agency. (b) For the approval of a major repair design, the applicant shall include in the application, or submit after the initial application, a compliance demonstration plan: 1. containing a description of the damage and the repair design, identifying the configuration of the type design upon which the repair design is made; 2. identifying all the areas of the type design and the approved manuals that are changed or affected by the repair design; 3. identifying any reinvestigations necessary to demonstrate the compliance of the repair design and the areas affected by the repair design with the type-certification basis and the applicable environmental protection requirements, incorporated by reference in, as applicable, either the type certificate or the supplemental type certificate; 4. identifying any proposed amendments to the type-certification basis incorporated by reference in, as applicable, either the type certificate or supplemental type certificate; 5. specifying whether the certification data has been or will be prepared completely by the applicant or on the basis of an arrangement with the owner of the type-certification data.