Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
21L.A.4 Airworthiness directives
Available versions for ERULES-1963177438-21174
Regulation (EU) 2022/1358
found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)
From
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
From section
To
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
21L.A.4 Airworthiness directives Regulation (EU) 2022/1358 When an airworthiness directive has to be issued by the Agency in accordance with point [21L.B.23](#_DxCrossRefBm1649097738) to correct an unsafe condition, or to require the performance of an inspection, the holder of the type certificate, supplemental type certificate, major repair design approval, or any other relevant certificate deemed to have been issued under this Annex, as well as the declarant of a declaration of design compliance, as applicable, shall: (a) propose the appropriate corrective action or required inspections, or both, and submit details of these proposals to the Agency for approval; (b) following the approval by the Agency of the proposals referred to under point (a), make available to all known operators or owners of the product or part, and, on request, to any person required to comply with the airworthiness directive, appropriate descriptive data and accomplishment instructions.
#### 21L.A.4 Airworthiness directives *Regulation (EU) 2022/1358* When an airworthiness directive has to be issued by the Agency in accordance with point [21L.B.23](#_DxCrossRefBm485231234) to correct an unsafe condition, or to require the performance of an inspection, the holder of the type certificate, supplemental type certificate, major repair design approval, or any other relevant certificate deemed to have been issued under this Annex, as well as the declarant of a declaration of design compliance, as applicable, shall: (a) propose the appropriate corrective action or required inspections, or both, and submit details of these proposals to the Agency for approval; (b) following the approval by the Agency of the proposals referred to under point (a), make available to all known operators or owners of the product or part, and, on request, to any person required to comply with the airworthiness directive, appropriate descriptive data and accomplishment instructions.