Compare and highlight differences

Compare / EASA/ Incorporated Amendments/ Compare & Highlight Differences

21L.B.22 Enforcement measures

Available versions for ERULES-1963177438-21144

Regulation (EU) 2022/1361 found in: Initial Airworthiness and Environmental Protection (No 748/2012) Part-21 Part-21L (Jul 2024)

Version Text

21L.B.22 Enforcement measures

Regulation (EU) 2022/1361

(a)     The
competent authority shall:

1.       suspend
a certificate if the competent authority considers that there are reasonable
grounds that such action is necessary to prevent a credible threat to aircraft
safety;

2.       issue
an airworthiness directive under the conditions of point [21L.B.23](#_DxCrossRefBm1649097738);

3.       suspend,
revoke or limit a certificate if such action is required pursuant to point (d)
of point [21L.B.21](#_DxCrossRefBm1649097779);

4.       suspend
or revoke a certificate of airworthiness or a restricted certificate of
airworthiness when the conditions specified in point (b) of point [21L.B.163](#_DxCrossRefBm1649098217) are met;

5.       suspend
or revoke a noise certificate or a restricted noise certificate when the
conditions specified in point (b) of point [21L.B.173](#_DxCrossRefBm1649098216)
are met;

6.       take
immediate and appropriate action necessary to limit or prohibit the activities
of an organisation or natural or legal person if the competent authority
considers that there are reasonable grounds that such action is necessary to
prevent a credible threat to aircraft safety;

7.       limit
or prohibit the activities of an organisation or a natural or legal person
that have declared their capabilities to design or produce products or parts
in accordance with Section A or that issue statements of conformity ([EASA Form 52B](#_DxCrossRefBm1649097273)) or authorised release
certificates ([EASA Form 1](#_DxCrossRefBm1649097780)) in
accordance with [Subpart R](#_DxCrossRefBm1649097780) of Section A of
this Annex pursuant to point (d) of point [21L.B.21](#_DxCrossRefBm1649097779);

8.       not
register a declaration of design compliance as long as there are unresolved
findings from the initial oversight investigation;

9.       temporarily
or permanently de-register a declaration of design compliance or a declaration
of capability pursuant to point (d) of point [21L.B.21](#_DxCrossRefBm1649097779);

10.     take
any further enforcement measures necessary in order to ensure the termination
of a non‑compliance with the essential requirements set out in Annex II to
Regulation (EU) 2018/1139 and with this Annex, and, where necessary, remedy
the consequences thereof.

(b)     Upon
taking an enforcement measure in accordance with point (a), the competent
authority shall notify it to the addressee, state the reasons for it, and
inform the addressee of their right to appeal.