Compare and highlight differences

Compare / EASA/ Incorporated Amendments/ Compare & Highlight Differences

AMC1 21.A.124 Application

Available versions for ERULES-1963177438-20317

ED Decision 2022/021/R found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

From

Show details Hide details

AMC1 21.A.124 Application

ED Decision 2022/021/R

An applicant should submit to the
competent authority a fully completed EASA Form 60 (see below):

<table border="1" cellpadding="0" cellspacing="0" width="604">
<tr>
<td colspan="2" valign="top" width="604">
EASA Form 60
Application for an agreement of
 production under Part 21, Subpart F
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="604">
Competent authority
of an EU Member State
 or
EASA
</td>
</tr>
<tr>
<td valign="top" width="330">
1.          Registered
 name and address of the applicant:
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td valign="top" width="330">
2.          Trade
 name (if different)
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td valign="top" width="330">
3.          Location(s)
 of manufacturing activities:
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td colspan="2" valign="top" width="604">
4.          Description
 of the manufacturing activities under application:
</td>
</tr>
<tr>
<td valign="top" width="330">
(a)         identification
 (TC, P/N, …, as appropriate):
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td valign="top" width="330">
(b)         termination
 (No. of units, termination date, …):
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td valign="top" width="330">
5.          Evidence
 supporting the application, as per point <a href="#_DxCrossRefBm1649097117">21.A.124</a>(b):
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td valign="top" width="330">
6.          Links/arrangements
 with design approval holder(s) (DAHs)/ design organisation(s) (DO(s)), where
 different from Block 1:
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td valign="top" width="330">
7.          Human
 resources:
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td valign="top" width="330">
8.          Name
 of the person signing the application:
</td>
<td valign="top" width="273">
</td>
</tr>
<tr>
<td valign="top" width="330">
______________________________
Date
</td>
<td valign="top" width="273">
___________________________________
Signature
</td>
</tr>
</table>

EASA Form 60 Issue 3

Block 1:The name of the applicant
should be entered. For legal entities, the name should be as stated in the
register of the National Companies Registration Office. In this case, a copy
of the entry in the register of the National Companies Registration Office
should be provided to the competent authority.

Block 2: State the trade name by
which the applicant is known to the public if it is different from the
information given in Block 1. The use of a logo may be indicated in this
block.

Block 3: State all the locations of
the manufacturing activities that are covered by the application. Only those
locations should be stated that are directly under the control of the
applicant that is stated in Block 1.

Block 4: This block should include
further details of the manufacturing activities under approval for the
addresses that are indicated in Block 3. The ‘Identification’ block
should indicate the products, parts, or appliances that are intended to be
produced, while the ‘Termination’ block should address any information on the
limitation of the activity, e.g. by stating the intended number of units to be
manufactured or the expected date of completion of the manufacturing
activities.

Block 5: This block should state the
evidence that supports the determination of applicability as stated in point [21.A.121](#_DxCrossRefBm1649097109). In addition, an outline of the
manual that is required by point [21.A.125A](#_DxCrossRefBm1649096929)(b)
should be provided with the application.

Block 6: The information entered
here is essential for the evaluation of the eligibility of the application.
Therefore, special attention should be given concerning the completion of this
block, either directly, or by reference to supporting documentation in relation
to the requirements of point [21.A.122](#_DxCrossRefBm1649096913)
and to [AMC1 21.A.122](#_DxCrossRefBm1649097113).

Block 7: The information to be
entered here should reflect the number of staff or in the case of an initial
approval, the intended number of staff for the manufacturing activities under
this application, and therefore, it should also include any associated
administrative staff.

Block 8: State the name of the
person that is authorised to sign the application.

##### AMC1 21.A.124 Application

*ED Decision 2022/021/R*

An applicant should submit to the competent authority a fully
completed EASA Form 60 (see below):

<table cellpadding="7" cellspacing="0">
<col/>
<col/>
<tr>
<td colspan="2" valign="top">
EASA
			Form 60
Application
			for an agreement of production under Part 21, Subpart F
</td>
</tr>
<tr>
<td colspan="2" valign="top">
Competent
			authority

of
			an EU Member State or
EASA
</td>
</tr>
<tr valign="top">
<td>
1.	Registered
			name and address of the applicant:

 


 

 

</td>
<td>
 

</td>
</tr>
<tr valign="top">
<td>
2.	Trade
			name (if different)
</td>
<td>
 

</td>
</tr>
<tr valign="top">
<td>
3.	Location(s)
			of manufacturing activities:
</td>
<td>
 

</td>
</tr>
<tr>
<td colspan="2" valign="top">
4.	Description
			of the manufacturing activities under application:
</td>
</tr>
<tr valign="top">
<td>
(a)	identification
			(TC, P/N, …, as appropriate):
</td>
<td>
 

</td>
</tr>
<tr valign="top">
<td>
(b)	termination
			(No. of units, termination date, …):
</td>
<td>
 

</td>
</tr>
<tr valign="top">
<td>
5.	Evidence
			supporting the application, as per point <a href="#_DxCrossRefBm485230608">21.A.124</a>(b):
</td>
<td>
 

</td>
</tr>
<tr valign="top">
<td>
6.	Links/arrangements
			with design approval holder(s) (DAHs)/ design organisation(s)
			(DO(s)), where different from Block 1:
</td>
<td>
 

</td>
</tr>
<tr valign="top">
<td>
7.	Human
			resources:
</td>
<td>
 

</td>
</tr>
<tr valign="top">
<td>
8.	Name
			of the person signing the application:
</td>
<td>
 

</td>
</tr>
<tr valign="top">
<td>
 


 


 


 


______________________________
Date
</td>
<td>
 


 


 


 


___________________________________
Signature
</td>
</tr>
</table>

**EASA
Form 60 Issue 3**

Block 1:The name of the applicant should be entered. For legal
entities, the name should be as stated in the register of the
National Companies Registration Office. In this case, a copy of the
entry in the register of the National Companies Registration Office
should be provided to the competent authority.

Block 2: State the trade name by which the applicant is known to
the public if it is different from the information given in Block 1.
The use of a logo may be indicated in this block.

Block 3: State all the locations of the manufacturing activities
that are covered by the application. Only those locations should be
stated that are directly under the control of the applicant that is
stated in Block 1.

Block 4: This block should include further details of the
manufacturing activities under approval for the addresses that are
indicated in Block 3. The ‘Identification’ block should
indicate the products, parts, or appliances that are intended to be
produced, while the ‘Termination’ block should address any
information on the limitation of the activity, e.g. by stating the
intended number of units to be manufactured or the expected date of
completion of the manufacturing activities.

Block 5: This block should state the evidence that supports the
determination of applicability as stated in point [21.A.121](#_DxCrossRefBm485230600).
In addition, an outline of the manual that is required by
point [21.A.125A](#_DxCrossRefBm485230420)(b)
should be provided with the application.

Block 6: The information entered here is essential for the
evaluation of the eligibility of the application. Therefore, special
attention should be given concerning the completion of this block,
either directly, or by reference to supporting documentation in
relation to the requirements of point [21.A.122](#_DxCrossRefBm485230404)
and to [AMC1 21.A.122](#_DxCrossRefBm485230604).

Block 7: The information to be entered here should reflect the
number of staff or in the case of an initial approval, the intended
number of staff for the manufacturing activities under this
application, and therefore, it should also include any associated
administrative staff.

Block 8: State the name of the person that is authorised to sign
the application.

Compare / EASA/ Incorporated Amendments/ Compare & Highlight Differences

AMC1 21.A.124 Application

View