GM1 145.A.85(b) Changes to the organisation

• ED Decision 2022/011/R found in: Continuing Airworthiness (1321/2014) Part-M Part-145 Part-66 Part-147 Part-T Part-ML Part-CAMO Part-CAO (Jul 2024)

GM1 145.A.85(b) Changes to the organisation ED Decision 2022/011/R CHANGES REQUIRING PRIOR APPROVAL (OTHER THAN THOSE COVERED BY POINT 145.A.85(A)) The following are examples of changes that require prior approval by the competent authority (other than those covered by point [145.A.85(a)](#_DxCrossRefBm1518545433)), as specified in Part-145: (a) changes to the AltMoC [[145.A.120(b)](#_DxCrossRefBm1518545534)]; (b) changes to the MOE procedure for the use of alternative tooling or equipment [[145.A.40(a)(i)](#_DxCrossRefBm1518545434)]; (c) changes to the MOE procedure allowing a B-rated organisation to carry out maintenance on an installed engine during ‘base’ and ‘line’ maintenance [[Appendix II, point (f)](#_DxCrossRefBm1518545533)]; (d) changes to the MOE procedure allowing a C-rated organisation to carry out maintenance on an installed component (other than a complete engine/APU) during ‘base’ and ‘line’ maintenance or at an engine/APU maintenance facility [[Appendix II, point (g)](#_DxCrossRefBm1518545533)]; (e) changes to the procedures to establish and control the competency of personnel [[145.A.30(e)](#DX4203032259)]; (f) changes to the system for reporting to the competent authority on the safety performance and regulatory compliance of the organisation (in the case of an extension of the oversight planning cycle beyond 36 months) [[145.B.305(d)](#_DxCrossRefBm1518545532)]. ##### GM1 145.A.85(b) Changes to the organisation *ED Decision 2022/011/R* **CHANGES REQUIRING PRIOR APPROVAL (OTHER THAN THOSE COVERED BY POINT 145.A.85(A))** The following are examples of changes that require prior approval by the competent authority (other than those covered by point [145.A.85(a)](#_DxCrossRefBm1203440320)), as specified in Part-145: (a) changes to the AltMoC [[145.A.120(b)](#_DxCrossRefBm1203440421)]; (b) changes to the MOE procedure for the use of alternative tooling or equipment [[145.A.40(a)(i)](#_DxCrossRefBm1203440321)]; (c) changes to the MOE procedure allowing a B-rated organisation to carry out maintenance on an installed engine during ‘base’ and ‘line’ maintenance [[Appendix II, point (f)](#_DxCrossRefBm1203440420)]; (d) changes to the MOE procedure allowing a C-rated organisation to carry out maintenance on an installed component (other than a complete engine/APU) during ‘base’ and ‘line’ maintenance or at an engine/APU maintenance facility [[Appendix II, point (g)](#_DxCrossRefBm1203440420)]; (e) changes to the procedures to establish and control the competency of personnel [[145.A.30(e)](#DX4203032259)]; (f) changes to the system for reporting to the competent authority on the safety performance and regulatory compliance of the organisation (in the case of an extension of the oversight planning cycle beyond 36 months) [[145.B.305(d)](#_DxCrossRefBm1203440419)].