AMC No 1 to CS 25.603(a) Suitability and durability of materials -- Experience or tests

• ED Decision 2021/015/R found in: CS-25 Amdt 27 - Large Aeroplanes (Jan 2023)

AMC No 1 to CS 25.603(a) Suitability and durability of materials — Experience or tests ED Decision 2021/015/R To show compliance with [CS 25.603](#_DxCrossRefBm1709821059) and [CS 25.605](#_DxCrossRefBm1709821066), applicants may use previous applicable experience and/or tests together with material specifications and material process specifications. Applicants should therefore carefully consider the controls on materials and material processing that are appropriate to the design data to be used for any part (e.g. controls on additive manufacturing powder material handling processes). However, as material strength and other properties may result from the process limitations that are specific to the configuration of some complex parts, the applicability of previous experience to new part configurations may be limited. Shared databases: when the material strength and other properties that are used in the design data are not only influenced by the constituent materials and/or material processes, but also by the manufacturing and assembly processes, demonstrating controls on constituent materials and material processes may assist applicants in developing the final design data. For example, if an applicant successfully demonstrates data equivalence with established and accepted databases, this may create confidence in the applicant’s production processes, if not providing existing design values. [Amdt No: 25/27]