CS 26.307(a)(iii) and (c) Damage tolerance data for existing changes to the FCS

• ED Decision 2020/023/R found in: CS-26 Additional Airworthiness Specifications for Operations (No 2015/640) Part-26 (Mar 2023)

CS 26.307(a)(iii) and (c) Damage tolerance data for existing changes to the FCS ED Decision 2020/023/R Compliance with the fatigue and damage tolerance evaluation required by point [26.307 (a)(iii) and (c)](#_DxCrossRefBm881534086) of Part-26 is demonstrated by complying with CS 25.571 Amendment 19 or subsequent amendment, or with the following: (a) The fatigue and damage tolerance evaluation is in accordance with the damage tolerance requirements of the applicable certification basis, except as provided in point (b) of this CS. (b) For aeroplanes certified on the basis of JAR-25 Change 6 or 14 CFR §25.571 Amendment 44 or equivalent, or earlier amendments, the fatigue and damage tolerance evaluation of the change is in accordance with JAR-25 Change 7 or 14 CFR §25.571 Amendment 45, or equivalent, or later amendments, except that residual strength loads may be based upon the fail-safe load cases of the original certification basis. [Issue: 26/3]