Compare and highlight differences

Compare / EASA/ Incorporated Amendments/ Compare & Highlight Differences

AMC1 ACNS.D.ADSB.030 ADS-B Transmit unit installation

Available versions for ERULES-1963177438-15911

ED Decision 2013/031/R found in: CS-ACNS Issue 4 - Airborne Communications, Navigation and Surveillance (Jun 2022)

Select original version

Select changed version

Removed: 0 Added: 0

AMC1 ACNS.D.ADSB.030 ADS-B Transmit unit installation

ED Decision 2013/031/R

To be approved, the ADS-B transmit unit should hold an EASA equipment authorisation in accordance with ETSO-C166b and ETSO-C112d, including any additional requirements as required to comply with the provision of the AMC’s to Subpart D section 4 (e.g. On-the-ground status determination and maximum NIC encoding). Where such additional requirements apply, it is expected that the ADS-B transmit unit manufacturer supplies compliance information through a Declaration of Design and Performance (DDP), or an equivalent document

The broadcast of Selected Altitude and Barometric Pressure Setting are optional for equipment meeting ETSO-C166b and equipment should implement this optional functionality if available and in a suitable format

If using earlier versions of ETSO-C112( ), it should to be demonstrated that all applicable requirements from EUROCAE ED-102A have been implemented. This can be achieved by a positive deviation of compliance to previous versions of EUROCAE ED-73 that have been documented in the Declaration of Design and Performance (DDP).

AMC1 ACNS.D.ADSB.030 ADS-B Transmit unit installation

ED Decision 2013/031/R