Article 13 - Conformity assessment procedures

• Regulation (EU) 2020/1058 found in: Unmanned Aircraft Systems (2019/947 and 2019/945) Part-UAS (Jul 2024)

Article 13 - Conformity assessment procedures Regulation (EU) 2020/1058 1. The manufacturer shall perform a conformity assessment of the product using one of the following procedures with a view to establishing its compliance with the requirements set out in Parts [1](#_DxCrossRefBm1106656890) to [6](#_DxCrossRefBm1106657030), [16](#_DxCrossRefBm1106656798) and [17](#_DxCrossRefBm1106656805) of the Annex. The conformity assessment shall take into account all intended and foreseeable operating conditions. 2. The procedures available to conduct the conformity assessment shall be the following: (a) internal production control as set out in [Part 7](#_DxCrossRefBm1106657043) of the Annex, when assessing the compliance of a product with the requirements set out in Parts [1](#_DxCrossRefBm1106656890), [5](#_DxCrossRefBm1106656892), [6](#_DxCrossRefBm1106657030), [16](#_DxCrossRefBm1106656798) or [17](#_DxCrossRefBm1106656805) of the Annex, subject to the condition that the manufacturer has applied harmonised standards, the references of which have been published in the Official Journal of the European Union, for all the requirements for which such standards exist; (b) EU-type examination followed by conformity to type based on internal production control as set out in Part 8 of the Annex; (c) conformity based on full quality assurance as set out in [Part 9](#_DxCrossRefBm1106657042) of the Annex, excepted when assessing the compliance of a product which is a toy within the meaning of Directive 2009/48/EC. ## Article 13 - Conformity assessment procedures *Regulation (EU) 2020/1058* 1. The manufacturer shall perform a conformity assessment of the product using one of the following procedures with a view to establishing its compliance with the requirements set out in Parts [1](#_DxCrossRefBm1295819208) to [6](#_DxCrossRefBm1295819348), [16](#_DxCrossRefBm1295819115) and [17](#_DxCrossRefBm1295819122) of the Annex. The conformity assessment shall take into account all intended and foreseeable operating conditions. 2. The procedures available to conduct the conformity assessment shall be the following: (a) internal production control as set out in [Part 7](#_DxCrossRefBm1295819360) of the Annex, when assessing the compliance of a product with the requirements set out in Parts [1](#_DxCrossRefBm1295819208), [5](#_DxCrossRefBm1295819210), [6](#_DxCrossRefBm1295819348), [16](#_DxCrossRefBm1295819115) or [17](#_DxCrossRefBm1295819122) of the Annex, subject to the condition that the manufacturer has applied harmonised standards, the references of which have been published in the O*fficial Journal of the European Union*, for all the requirements for which such standards exist; (b) EU-type examination followed by conformity to type based on internal production control as set out in Part 8 of the Annex; (c) conformity based on full quality assurance as set out in [Part 9](#_DxCrossRefBm1295819359) of the Annex, excepted when assessing the compliance of a product which is a toy within the meaning of Directive 2009/48/EC.