Compare and highlight differences

Compare / EASA/ Incorporated Amendments/ Compare & Highlight Differences

21.B.107 Issuance of an approval of a change to a type-certificate

Available versions for ERULES-1963177438-15125

Regulation (EU) 2022/201 found in: Initial Airworthiness and Environmental Protection (No 748/2012) Part-21 Part-21L (Jul 2024)

Version Text

21.B.107 Issuance of an approval of a change to a type-certificate

Regulation (EU) 2022/201

(a)     The
Agency shall issue an approval of a change to a type-certificate provided
that:

1.       the
applicant for an approval has complied with:

(i)       point [21.A.95](#_DxCrossRefBm1649097008) for a minor change; or

(ii)      point [21.A.97](#_DxCrossRefBm1649096997) for a major change;

2.       the
Agency, through its verification of the demonstration of compliance in
accordance with the level of its involvement determined pursuant to point (a)
or (b) of point [21.B.100](#_DxCrossRefBm1649096973) has not
found any non-compliance with the type-certification basis, operational
suitability data certification basis where applicable in accordance with point [21.B.82](#_DxCrossRefBm1649096972), and environmental protection
requirements; and

3.       no
feature or characteristic has been identified that may make the product unsafe
for the uses for which certification is requested.

(b)     In
the case of a change affecting the operational suitability data, by derogation
from points (1) and (2) of point (a), at the applicant's
request included in the declaration referred to in point [21.A.20](#_DxCrossRefBm1649096852)(d), the Agency may approve a
change to an aircraft type-certificate before compliance with the operational
suitability data certification basis has been demonstrated, provided that the
applicant demonstrates such compliance before the date at which those data are
to be actually used.

(c)      The
approval of the changes to the operational suitability data shall be included
in the approval of the change to the type-certificate.

(d)     The
approval of a change to a type-certificate shall be limited to the specific
configuration(s) in the type-certificate to which the change relates.