Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
21.B.75 Special conditions
Available versions for ERULES-1963177438-15122
Regulation (EU) 2019/897
found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)
Regulation (EU) 2024/1108
found in: Initial Airworthiness and Environmental Protection (748/2012) (Nov 2025)
From
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
From section
To
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
21.B.75 Special conditions Regulation (EU) 2019/897 (a) The Agency shall prescribe special detailed technical specifications, named ‘special conditions, for a product if the related certification specifications do not contain adequate or appropriate safety standards for the product because: 1. the product has novel or unusual design features relative to the design practices on which the applicable certification specifications are based; 2. the intended use of the product is unconventional; or 3. experience from other similar products in service or products having similar design features or newly identified hazards have shown that unsafe conditions may develop. (b) Special conditions contain such safety standards as the Agency finds necessary in order to establish a level of safety equivalent to that of the applicable certification specifications.
#### 21.B.75 Special conditions *Regulation (EU) 2024/1108* (a) The Agency shall prescribe special detailed technical specifications, named ‘special conditions’, for a product, a UAS or a CMU if the related certification specifications do not contain adequate or appropriate safety standards for the product, UAS or CMU because: 1. the product, the UAS or the CMU has novel or unusual design features relative to the design practices on which the applicable certification specifications are based; 2. the intended use of the product is unconventional; or 3. in-service experience with other similar products, UAS or CMUs or with products or CMUs that have similar design features or newly identified hazards has shown that unsafe conditions may develop. (b) Special conditions contain such safety standards as the Agency finds necessary in order to establish a level of safety equivalent to that of the applicable certification specifications.