NCO.GEN.104 Use of aircraft included in an AOC by an NCO operator

• Regulation (EU) 2019/1384 found in: Air Operations (965/2012) Part-ARO Part-ORO Part-CAT Part-SPA Part-NCC Part-NCO Part-SPO (Feb 2025)

NCO.GEN.104 Use of aircraft included in an AOC by an NCO operator Regulation (EU) 2019/1384 (a) An NCO operator may use other than complex motor-powered aircraft listed on an operator's AOC to conduct non-commercial operations in accordance with this Annex. (b) The NCO operator using the aircraft in accordance with point (a) shall establish a procedure: (1) clearly describing how operational control of the aircraft is transferred between the AOC holder and the NCO operator, as referred to in point ORO.GEN.310 of Annex III; (2) describing the handover procedure of the aircraft upon its return to the AOC holder. That procedure shall be included in a contract between the AOC holder and the NCO operator. The NCO operator shall ensure that the procedure is communicated to the relevant personnel. (c) The continuing airworthiness of the aircraft used pursuant to point (a) shall be managed by organisation responsible for the continuing airworthiness for the aircraft included in the AOC, in accordance with Regulation (EU) No 1321/2014. (d) The NCO operator using the aircraft in accordance with point (a) shall ensure the following: (1) that every flight conducted under its operational control is recorded in the aircraft technical log system; (2) that no changes to the aircraft systems or configuration are made; (3) that any defect or technical malfunction occurring while the aircraft is under its operational control is reported to the organisation referred to in point (c) immediately after the flight; (4) that the AOC holder receives a copy of any occurrence report related to the flights performed with the aircraft, completed in accordance with Regulation (EU) No 376/2014 and Regulation (EU) 2015/1018. NCO.GEN.104 Use of aircraft included in an AOC by an NCO operator Regulation (EU) 2019/1384 (a) An NCO operator may use other than complex motor-powered aircraft listed on an operator's AOC to conduct non-commercial operations in accordance with this Annex. (b) The NCO operator using the aircraft in accordance with point (a) shall establish a procedure: (1) clearly describing how operational control of the aircraft is transferred between the AOC holder and the NCO operator, as referred to in point ORO.GEN.310 of Annex III; (2) describing the handover procedure of the aircraft upon its return to the AOC holder. That procedure shall be included in a contract between the AOC holder and the NCO operator. The NCO operator shall ensure that the procedure is communicated to the relevant personnel. (c) The continuing airworthiness of the aircraft used pursuant to point (a) shall be managed by organisation responsible for the continuing airworthiness for the aircraft included in the AOC, in accordance with Regulation (EU) No 1321/2014. (d) The NCO operator using the aircraft in accordance with point (a) shall ensure the following: (1) that every flight conducted under its operational control is recorded in the aircraft technical log system; (2) that no changes to the aircraft systems or configuration are made; (3) that any defect or technical malfunction occurring while the aircraft is under its operational control is reported to the organisation referred to in point (c) immediately after the flight; (4) that the AOC holder receives a copy of any occurrence report related to the flights performed with the aircraft, completed in accordance with Regulation (EU) No 376/2014 and Regulation (EU) 2015/1018. #### NCO.GEN.104 Use of aircraft included in an AOC by an NCO operator *Regulation (EU) 2019/1384* (a) An NCO operator may use other than complex motor-powered aircraft listed on an operator's AOC to conduct non-commercial operations in accordance with this Annex. (b) The NCO operator using the aircraft in accordance with point (a) shall establish a procedure: (1) clearly describing how operational control of the aircraft is transferred between the AOC holder and the NCO operator, as referred to in point ORO.GEN.310 of Annex III; (2) describing the handover procedure of the aircraft upon its return to the AOC holder. That procedure shall be included in a contract between the AOC holder and the NCO operator. The NCO operator shall ensure that the procedure is communicated to the relevant personnel. (c) The continuing airworthiness of the aircraft used pursuant to point (a) shall be managed by organisation responsible for the continuing airworthiness for the aircraft included in the AOC, in accordance with Regulation (EU) No 1321/2014. (d) The NCO operator using the aircraft in accordance with point (a) shall ensure the following: (1) that every flight conducted under its operational control is recorded in the aircraft technical log system; (2) that no changes to the aircraft systems or configuration are made; (3) that any defect or technical malfunction occurring while the aircraft is under its operational control is reported to the organisation referred to in point (c) immediately after the flight; (4) that the AOC holder receives a copy of any occurrence report related to the flights performed with the aircraft, completed in accordance with Regulation (EU) No 376/2014 and Regulation (EU) 2015/1018.