ED Decision 2023/013/R
APPLICABLE ENVIRONMENTAL PROTECTION REQUIREMENTS
The applicable environmental protection requirements are the Standards and Recommended Practices (SARPs) in Volume I âAircraft Noiseâ, Volume II âAircraft Engine Emissionsâ and Volume III âAeroplane CO2 Emissionsâ of Annex 16 to the Chicago Convention for products for which the first subparagraph of Article 9(2) of Regulation (EU) 2018/1139 applies. The applicable levels of amendments to Annex 16 to the Chicago Convention are those adopted in the first subparagraph of Article 9(2) of Regulation (EU) 2018/1139.
Related guidance material is provided in the attachments to these Annex 16 volumes and in ICAO Doc 9501 âEnvironmental Technical Manualâ, Volume I âProcedures for the Noise Certification of Aircraftâ, Volume II âProcedures for the Emissions Certification of Aircraft Enginesâ and Volume III âProcedures for the CO2 Emissions Certification of Aeroplanesâ.
However, these SARPs apply only to certain categories of products and as such do not necessarily apply to all products that are within the scope of Subpart C. The applicability of the SARPs is provided in the administration chapters and in the specific applicability sections of the chapters of Annex 16 Volumes I, II and III.
EASA GM1 21L.B.61(c)(1) defines environmental protection requirements for design compliance declarations, referencing Annex 16 SARPs (noise, engine emissions, CO2) and ICAO Doc 9501 guidance, with applicability limited.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...