ED Decision 2023/013/R
DECLARATION OF COMPLIANCE
All compliance-demonstration activities conducted in accordance with the compliance-demonstration plan, including all the testing and inspections conducted in accordance with point 21L.A.25(c) and all flight testing conducted in accordance with point 21L.A.25(d) and those necessary to determine compliance with the applicable environmental protection requirements should be completed before the issuance of the final declaration of compliance.
‘No feature or characteristic’ that may make the product unsafe in point 21L.A.25(f)(2) means the following: while every effort is made to address in the applicable certification basis all the risks to product safety that may be caused by the product, experience shows that safety-related events may occur with products in service, even though compliance with the certification basis is fully demonstrated. One of the reasons may be that some existing risks are not properly addressed in the certification basis. Therefore, the applicant should declare that it has not identified any such features or characteristics.
‘No feature or characteristic’ that may make the product environmentally incompatible (point 21L.A.25(f)(2)):
It is assumed that environmental compatibility is demonstrated when the product complies with the applicable environmental protection requirements. Therefore, the applicant, when declaring that the aircraft complies with the applicable environmental protection requirements under point 21L.A.25(f)(1), shall also declare that they have not identified any such feature or characteristic.
Guidance on declaration of compliance: complete all testing and inspections before final declaration; clarify 'no unsafe feature' and 'no environmental incompatibility' per 21L.A.25(f).
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...