What should be stated under scope of work C2 for Parts?

Under C2 for Parts, the state part generic types (e.g., Wing, Landing Gear, etc.) should be stated. Examples include Structural, Metallic/non-metallic, Mechanical/Hydraulic/Pneumatic, Electrical, Electronic.

Under which scope of work code is 'Issue of permit to fly' listed, and what must be stated?

D2 corresponds to 'Issue of permit to fly', and the state aircraft types must be stated.

Under which scope of work code is 'Maintenance' listed, and what must be stated?

D1 corresponds to 'Maintenance', and the state aircraft types must be stated.

Which scope of work code corresponds to 'Manned Balloons'?

A8 corresponds to Manned Balloons.

Which scope of work code corresponds to 'Turbine Engines'?

B1 corresponds to Turbine Engines.

Which scope of work code corresponds to 'Very Light Aeroplanes'?

A11 corresponds to Very Light Aeroplanes.

Which scope of work code corresponds to 'Large Aeroplanes'?

A1 corresponds to Large Aeroplanes.

Which scope of work code corresponds to 'Small Helicopters'?

A4 corresponds to Small Helicopters.

GM 21.A.151 Terms of approval - Scope and categories

Q: For what purposes are the codes shown against each scope of work item intended to be used by the competent authority?

The codes are intended for use by the competent authority for purposes such as managing, administering and filing details of approvals, and may also assist in the production and publication of a list of approval holders.

Q: How will the scope of work for products be described by the competent authority?

For products, the scope of work will be described by the general area (similar to the titles of the corresponding certification codes) and the type of product in accordance with the type-certificate.

Q: How will the scope of work for parts and appliances be described?

For parts and appliances, the scope of work will be described by the general area showing the expertise (e.g., mechanical, metallic structure) and the generic type (e.g., wing, landing gear, tyres).

Q: What should be stated under scope of work C1 for Appliances?

Under C1 for Appliances, the state appliance generic types (e.g., Tyres, Altimeter, etc.) should be stated. Examples include Avionic, Com/Nav/Pulse Computer System, Aircraft/Engine/Avionic Instruments, Mechanical/Electrical/Gyroscopic/Electronic, Mechanical/Hydraulic/Pneumatic.

Q: What is the purpose of the codes shown against each scope of work item?

The codes are intended for use by the competent authority for purposes such as managing, administering and filing details of approvals, and may also assist in the production and publication of a list of approval holders.

Q: What does the scope of work description for products include?

For products, the scope of work description includes the general area (similar to the titles of the corresponding certification codes) and the type of product in accordance with the type-certificate.

Navigate / EASA

Ask question Discover more Add to collection

GM 21.A.151 Terms of approval – Scope and categories

ED Decision 2012/020/R

Terms of approval document(s) will be issued by the competent authority under 21.A.135 to identify the scope of work, the products, and/or categories for which the holder is entitled to exercise the privileges defined in 21.A.163.

The codes shown against each scope of work item are intended for use by the competent authority for purposes such as managing, administering and filing details of approvals. It may also assist in the production and publication of a list of approval holders.

The scope of work, the Products, Parts, or Appliances for which the POA holder is entitled to exercise the privileges defined in 21.A.163 will be described by the competent authority as follows:

FOR PRODUCTS:

1. General area, similar to the titles of the corresponding certification codes.

2. Type of Product, in accordance with the type-certificate.

FOR PARTS AND APPLIANCES:

1. General area, showing the expertise, e.g., mechanical, metallic structure.

2. Generic type, e.g., wing, landing gear, tyres.

SCOPE OF WORK	PRODUCTS/CATEGORIES
A1 Large Aeroplanes A2 Small Aeroplanes A3 Large Helicopters A4 Small Helicopters A5 Gyroplanes A6 Sailplanes A7 Motor Gliders A8 Manned Balloons A9 Airships A10 Light Sport Aeroplanes A11 Very Light Aeroplanes A12 Other	State types ‘ ‘ ‘ ‘ ‘ ‘ ‘ ‘ ‘ ‘ ‘
B1 Turbine Engines B2 Piston Engines B3 APU’s B4 Propellers	‘ ‘ ‘
C1 Appliances: C2 Parts:	State appliance generic types (e.g., Tyres, Altimeter, etc.) Examples include: Avionic, Com/Nav/Pulse Computer System, Aircraft/Engine/Avionic Instruments, Mechanical/Electrical/Gyroscopic/Electronic Mechanical/Hydraulic/Pneumatic State part generic types (e.g., Wing, Landing Gear, etc.) Examples include: Structural, Metallic/non-metallic Mechanical/Hydraulic/Pneumatic Electrical Electronic
D1 Maintenance D2 Issue of permit to fly	State aircraft types State aircraft types

SCOPE OF WORK

PRODUCTS/CATEGORIES

A1 Large Aeroplanes

A2 Small Aeroplanes

A3 Large Helicopters

A4 Small Helicopters

A5 Gyroplanes

A6 Sailplanes

A7 Motor Gliders

A8 Manned Balloons

A9 Airships

A10 Light Sport Aeroplanes

A11 Very Light Aeroplanes

A12 Other

State types

‘

B1 Turbine Engines

B2 Piston Engines

B3 APU’s

B4 Propellers

‘

C1 Appliances:

C2 Parts:

State appliance generic types (e.g., Tyres, Altimeter, etc.)

Examples include:

Avionic, Com/Nav/Pulse Computer System,

Aircraft/Engine/Avionic Instruments, Mechanical/Electrical/Gyroscopic/Electronic

Mechanical/Hydraulic/Pneumatic

State part generic types (e.g., Wing, Landing Gear, etc.)

Examples include:

Structural, Metallic/non-metallic

Mechanical/Hydraulic/Pneumatic

Electrical Electronic

D1 Maintenance

D2 Issue of permit to fly

State aircraft types

Details

Source-Title: GM 21.A.151 Terms of approval - Scope and categories View latest amendments

Erulesid: ERULES-1963177438-3831 Compare versions

Domain: Initial airworthiness

Applicabilitydate: 6 November, 2012

Entryintoforcedate: 6 November, 2012

Regulatorysource: ED Decision 2012/020/R Navigate

Regulatorysubject: Part-21

Typeofcontent: GM to IR (Guidance material to implementing rule)

Origin: EASA

Category: EAR