Regulation (EU) 2022/1358
Appendix I
Restricted Certificate of Airworthiness — EASA Form 24B
Competent authority logo
RESTRICTED CERTIFICATE OF AIRWORTHINESS (DECLARED)
4 |
[Member State of registry] [COMPETENT AUTHORITY OF THE MEMBER STATE] |
4 |
1. Nationality and registration marks |
2. Manufacturer and manufacturer’s designation of aircraft |
3. Aircraft serial number |
|
4. Categories |
|||
5. This restricted certificate of airworthiness is issued pursuant to Article 18(2)(a) of Regulation (EU) 2018/1139 in respect of the above-mentioned aircraft which is considered to be airworthy when maintained and operated in accordance with the foregoing and the pertinent operating limitations.
In addition to above, the following restriction applies: This restricted certificate of airworthiness is issued on the basis of a declaration of design compliance made in accordance with Regulation (EU) No 748/2012 and is valid and recognised in all EU Member States without further requirements or evaluation. This certificate does not comply with all of the applicable Standards of Annex 8 to the Convention on International Civil Aviation and therefore may not be valid for international air navigation over non-EU Member States, unless approved by the state(s) being overflown.
|
|||
Date of issue: |
Signature: |
||
6. This restricted certificate of airworthiness is valid unless revoked by the competent authority of the Member State of registry.
A current airworthiness review certificate shall be attached to this certificate. |
|||
EASA Form 24B — Issue 1
This certificate shall be carried on board during all flights.
--
(4) 2For use by the Member State of registry
EASA Form 24B is the restricted certificate of airworthiness, issued under Article 18(2)(a) of Regulation (EU) 2018/1139, based on a design compliance declaration, valid across EU Member States, with limitations for non-
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...