What are the components of MC0 compliance statement?

The components are: (a) compliance statement, (b) reference to design data, (c) election of methods, factors, etc., and (d) definitions.

What are the four types of compliance activities in the table?

Engineering evaluation, tests, inspection, and equipment qualification.

What is the associated compliance document for MC6 flight tests?

The table does not list a specific associated compliance document for MC6; it only lists test programmes, test reports, and test interpretations for MC4.

Which means of compliance is not explicitly assigned to any type of compliance in the table?

All means of compliance are assigned to a type: MC0-MC3 to engineering evaluation, MC4-MC6 and MC8 to tests, MC7 to inspection, and MC9 to equipment qualification.

What is the relationship between MC9 and the other means of compliance?

MC9 equipment qualification is a process that may include all previous means of compliance at equipment level.

What are the associated compliance documents for MC4 laboratory tests?

Test programmes, test reports, and test interpretations.

What are the different types of compliance activities listed in Appendix A to AMC1 21L.A.44(a)?

The types of compliance are: engineering evaluation, tests, inspection, and equipment qualification.

Which means of compliance are associated with the 'engineering evaluation' type of compliance?

MC0 (compliance statement, reference to design data, election of methods/factors, definitions), MC1 (design review), MC2 (calculation/analysis), and MC3 (safety assessment).

What associated compliance documents are listed for MC0?

Design data and recorded statements.

Which means of compliance fall under the 'tests' type?

MC4 (laboratory tests), MC5 (ground tests on related product(s)), MC6 (flight tests), and MC8 (simulation).

What does MC9 equipment qualification involve according to the table?

Equipment qualification is a process that may include all previous means of compliance at equipment level.

Appendix A to AMC1 21L.A.44(a) Compliance activities for a declaration of design compliance

Navigate / EASA

Ask question Discover more Add to collection

Appendix A to AMC1 21L.A.44(a) Compliance activities for a declaration of design compliance

ED Decision 2023/013/R

MEANS-OF-COMPLIANCE CODES

Type of compliance	Means of compliance	Associated compliance documents
Engineering evaluation	MC0: (a) compliance statement (b) reference to design data (c) election of methods, factors, etc. (d) definitions	(a) Design data (b) Recorded statements
	MC1: design review	(c) Descriptions (d) Drawings
	MC2: calculation/analysis	(e) Substantiation reports
	MC3: safety assessment	(f) Safety analysis
Tests	MC4: laboratory tests	(g) Test programmes (h) Test reports (i) Test interpretations
	MC5: ground tests on related product(s)
	MC6: flight tests
	MC8: simulation
Inspection	MC7: design inspection/audit	(j) Inspection or audit reports
Equipment qualification	MC9: equipment qualification	Note: Equipment qualification is a process that may include all previous means of compliance at equipment level.

Details

Source-Title: Appendix A to AMC1 21L.A.44(a) Compliance activities for a declaration of design compliance View latest amendments

Erulesid: ERULES-1963177438-21971 Compare versions

Domain: Initial airworthiness

Amendedby: Issue 1

Applicabilitydate: 21 October, 2023

Entryintoforcedate: 21 October, 2023

Regulatorysource: ED Decision 2023/013/R Navigate

Regulatorysubject: Part 21 Light

Typeofcontent: AMC to IR (Acceptable means of compliance to implementing rule)

Parentir: AMC1 21L.A.44(a) Compliance activities for a declaration of design compliance

Origin: EASA

Category: EAR