To prevent a non-negligible safety effect on the product, due to the installation of a part or appliance referred to in point 21.A.307(b)(3) and (b)(4) that could potentially not conform to its design, the design approval holder (DAH) or EASA may identify in the ICA (in the case of 21.A.307(b)(3)) or in CS‑STAN (in the case of 21.A.307(b)(4)) any specific verification activities to be conducted by the installer on the part or appliance before installing it on the product in accordance with Regulation (EU) No 1321/2014.
When assessing the safety effect of a part or appliance identified in point 21.A.307(b)(3) and (b)(4), the DAH or EASA should assume that the installer would conduct, in accordance with Regulation (EU) No 1321/2014, any specific verification activities on the part or appliance or release documentation, as identified in the ICA or in CS-STAN.
Example: Information from the DAH contained in the ICA: ‘Part XXX-YY must comply with flammability requirement JJJ-KKK’.
Loading collections...