ED Decision 2013/015/R
(a) A maintenance manual containing the information that the applicant considers essential for proper maintenance must be provided.
(b) The part of the manual containing service life limitations, (replacement or overhaul) of parts, components and accessories subject to such limitations must be approved, identified and clearly distinguished from each other unapproved part of the Maintenance Manual.
(c) The Maintenance Manual shall comply with ASTM F2483-12 including all Annexes and Appendices, except as modified by the following table.
|
Delete |
1.2 |
|
Delete |
3.1.2 |
|
Delete |
3.1.6 |
|
Delete |
3.1.7 |
|
Delete |
3.1.7.1 |
|
Delete |
3.1.8 |
|
Delete |
3.1.14 |
|
Delete |
3.1.15 |
|
Delete |
3.1.16 |
|
Delete |
4 |
|
Delete |
Note 1 |
|
Modify |
5.3 When listing the level of
qualification needed to perform a task, the applicant shall use one of the
following qualifications from the applicable regulations of Part-M and
Part-66 for ELA1 aircraft maintenance: (1) Maintenance personnel of a Part-M,
Section A Subpart F maintenance organisation; (2) Independent certifying staff
qualified in accordance with Part-66; (3) Pilot/Owner qualified in accordance
with M.A.803. |
|
Delete |
5.3.1 to 5.3.6 |
|
Modify |
6.1 Authorisation to Perform — Part-M and
Part-66 must be consulted for minimum authorisation to perform line
maintenance, repairs and alterations of LSA aircraft. |
|
Delete |
Note 5 |
|
Modify |
7.1 Authorisation to Perform — Part-M and
Part-66 must be consulted for minimum authorisation to perform heavy
maintenance, repairs and alterations of LSA aircraft. |
|
Delete |
Section 8 and all sub-chapters and notes. |
|
Delete |
Section 9 and all sub-chapters and notes. |
|
Delete |
Section 10 and all sub-chapters and notes. |
|
Delete |
Section 11 and all sub-chapters and notes. |
|
Delete |
Section 12 and all sub-chapters. |
|
Delete |
Annex A1 LSA Major repair and alteration (MRA) requirements |
[Amdt LSA/1]
EASA Light Sport Aeroplane (LSA) maintenance requires an essential manual. Service life limitations must be approved and clearly identified. The manual should follow ASTM F2483-12 standards, with specific sections deleted or modified regarding qualifications and authorizations, referencing relevant regulations for aircraft maintenance and repairs.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...