Incorporated ED Decision |
CS Issue No, Amendment No |
Applicability date |
CS-ETSO/ Initial issue |
24/10/2003 |
|
CS-ETSO/ Amendment 1 |
18/7/2006 |
|
CS-ETSO/ Amendment 2 |
25/12/2007 |
|
CS-ETSO/ Amendment 3 |
18/11/2008 |
|
CS-ETSO/ Amendment 4 |
21/10/2009 |
|
CS-ETSO/ Amendment 5 |
8/12/2009 |
|
CS-ETSO/ Amendment 6 |
21/12/2010 |
|
CS-ETSO/ Amendment 7 |
5/7/2012[3] |
|
CS-ETSO/ Amendment 8 |
15/7/2013[4] |
|
CS-ETSO/ Amendment 9 |
1/5/2014 |
|
CS-ETSO/ Amendment 10 |
2/5/2016 |
|
CS-ETSO/ Amendment 11 |
5/8/2016 |
|
CS-ETSO/ Amendment 12 |
19/12/2016 |
|
CS-ETSO/ Amendment 13 |
20/2/2018[5] |
|
CS-ETSO/ Amendment 14 |
28/8/2018 |
|
CS-ETSO/ Amendment 15 |
1/1/2021 |
|
CS-ETSO/ Amendment 16 |
25/7/2020[6] |
|
CS-ETSO/ Amendment 17 |
9/7/2022[7] |
Note: To access the official versions, please click on the hyperlinks provided above.
[3] This is the main applicability date defined in the ED Decision. However, the decision allowed that this CS was not applied to applications received until 31 December 2012, if so requested by the applicant and providing that in such a case the applicant could demonstrate that the process of development of the relevant part or appliance started before the entry into force of the ED Decision (5 July 2012), in accordance with the specifications applicable at that time.
[4] This is the main applicability date defined in the ED Decision. However, the decision allowed that this CS was not applied to applications received until 31 December 2013, if so requested by the applicant and providing that in such a case the applicant could demonstrate that the process of development of the relevant part or appliance started before the entry into force of the ED Decision (15 July 2013), in accordance with the specifications applicable at that time.
[5] This is the main applicability date defined in the ED Decision. However, the decision allowed that this CS was not applied to applications received before 1 July 2018, if so requested by the applicant and providing that in such a case the applicant could demonstrate that the process of development of the relevant part or appliance started before the entry into force of the ED Decision (20 February 2018), in accordance with the specifications applicable at that time.
[6] This is the main applicability date defined in the ED Decision. However, this decision shall not apply to applications received by EASA 6 months after the date of entry into force of this Decision, if so requested by the applicant, and provided that in such a case the applicant can demonstrate that the process of development of the relevant part or appliance started before the date of entry into force of this decision and is in accordance with the specifications applicable at that time.
[7] This is the main applicability date defined in the ED Decision. However, this decision shall not apply to applications received by EASA 6 months after the date of entry into force of this Decision, if so requested by the applicant, and provided that in such a case the applicant can demonstrate that the process of development of the relevant part or appliance started before the date of entry into force of this decision and is in accordance with the specifications applicable at that time.
This section lists incorporated ED Decisions for CS-ETSO amendments with their applicability dates, including conditions for non-application to certain applications.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...