ED Decision 2018/002/R
1 Applicability
This ETSO provides the requirements which aircraft position lights that are designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in the Society of Automotive Engineers, Inc., (SAE) Aerospace Standard (AS) Document AS 8037C 'Minimum Performance Standard for Aircraft Position Lights' dated July 2013.
3.1.2 Environmental Standard
See CS-ETSO Subpart A paragraph 2.1
3.1.3 Software
See CS-ETSO Subpart A paragraph 2.2
3.1.3 Airborne Electronic Hardware
See CS-ETSO Subpart A paragraph 2.3
3.2 Specific
3.2.1 Failure Condition Classification
See CS-ETSO Subpart A paragraph 2.4.
4 Marking
4.1 General
In lieu of the marking detailed in CS-ETSO Subpart A paragraph 1.2, the minimum lamp candle power or lamp part number shall be shown.
4.2 Specific
None.
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3.
[Amdt ETSO/13]
Loading collections...