ED Decision 2008/012/R
1 Applicability
This ETSO gives the requirements which the Portable Gaseous Oxygen Supply that are manufactured on or after the date of this ETSO must meet in order to be identified with applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in the Society of Automotive Engineers (SAE), Inc, Document Aerospace Standard (AS) no AS 1046, “Minimum Standard for Portable Gaseous Oxygen Equipment”, Rev. B, dated 13 September 1989.
3.1.2 Environmental Standard
The equipment must be tested according to the applicable environmental standards contained in EUROCAE ED-14E (RTCA/DO-160E) “Environmental Conditions and Test Procedures for Airborne Equipment” from March 2005.
3.1.3 Computer Software
None.
3.2 Specific
3.2.1 Proof and Ultimate Strength Factors
For proof and ultimate strength factors CS 25.1453(a) shall apply.
4 Marking
4.1 General
Marking is detailed in CS-ETSO Subpart A paragraph 1.2.
4.2 Specific
As per AS 1046 Rev. B, dated 13 September 1989.
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3
[Amdt ETSO/3]
Loading collections...