ED Decision 2018/002/R
1 Applicability
This ETSO provides the requirements which cargo compartment fire detection instruments that are designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in SAE Aerospace Standard (AS) 8036 ‘Cargo Compartment Fire Detection Instruments’, Revision A, dated December 17, 2013, except for paragraphs 4.9, 4.10 and 4.11.
3.1.2 Environmental Standard
See CS-ETSO, Subpart A, paragraph 2.1.
3.1.3 Computer Software
See CS-ETSO, Subpart A, paragraph 2.2.
3.1.4 Airborne Electronic Hardware
See CS-ETSO, Subpart A, paragraph 2.3.
3.2 Specific
Demonstrate the required functional performance under the test conditions specified in Section 4 of AS8036, Revision A.
Demonstrate the required performance under the test conditions specified in Section 5 of AS8036, Revision A, using standard environmental conditions in accordance with 3.1.2.
3.2.1 Failure Condition Classification
See CS-ETSO, Subpart A, paragraph 2.4.
4 Marking
4.1 General
Marking is detailed in CS-ETSO, Subpart A, paragraph 1.2.
4.2 Specific
None.
5 Availability of Referenced Document
See CS-ETSO Subpart A, paragraph 3.
[Amdt ETSO/13]
ETSO-C1e requires cargo compartment fire detection instruments to meet SAE AS8036 Revision A performance standards, excluding paragraphs 4.9-4.11, with environmental, software, hardware, and failure condition standards,
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...