ED Decision 2012/009/R
1 Applicability
This ETSO gives the requirements which Airplane Galley Insert Equipment, Electrical/Pressurised that is manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in the Society of Automotive Engineers (SAE) Aerospace Standard (AS) 8057, Minimum Design and Performance of Airplane Galley Insert Equipment, Electrical/Pressurized, issued July, 2008 as modified by Appendix 1 of this document.
3.1.2 Environmental Standard
See AS 8057, paragraph 3.17 as modified by appendix 1 of this document.
3.1.3 Computer Software
See CS-ETSO Subpart A paragraph 2.2.
3.1.4 Electronic Hardware Qualification
See CS-ETSO Subpart A paragraph 2.3.
3.2 Specific
3.2.1 Failure Condition Classification
See CS-ETSO Subpart A paragraph 2.4.
Failure of the function defined in paragraph 3.1.1 of this ETSO has been determined to be a minor failure condition.
4 Marking
4.1 General
Marking as detailed in CS-ETSO Subpart A paragraph 1.2.
4.2 Specific
None.
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3.
[Amdt ETSO/7]
Loading collections...