ED Decision 2012/009/R
1 Applicability
This ETSO gives the requirements which High Frequency (HF) Radio Communications Transceiver Equipment Operating Within the Radio Frequency 1.5 to 30 Megahertz that are manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
This ETSO cancels ETSO-C31d “High Frequency (HF) Radio Communications Transmitting Equipment Operating within the Radio Frequency Range 1.5-30 Megahertz” and ETSO-C32d “High Frequency (HF) Radio Communications Receiving Equipment Operating within the Radio Frequency Range 1.5-30 Megahertz”.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in the Radio Technical Commission for Aeronautics (RTCA) Document DO-163, Minimum Operational Performance Standards - Airborne HF Radio Communications Transmitting and Receiving Equipment Operating within the Radio-Frequency Range of 1.5 to 30 MHz, dated 09/03/1976.
3.1.2 Environmental Standard
See CS-ETSO Subpart A paragraph 2.1.
3.1.3 Computer Software
See CS-ETSO Subpart A paragraph 2.2.
3.1.4 Electronic Hardware Qualification
See CS-ETSO Subpart A paragraph 2.3.
3.2 Specific
3.2.1 Failure Condition Classification
See CS-ETSO Subpart A paragraph 2.4.
Failure of the function defined in paragraph 3.1.1 of this ETSO has been determined to be a minor failure condition.
4 Marking
4.1 General
Marking as detailed in CS-ETSO Subpart A paragraph 1.2.
4.2 Specific
None
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3.
[Amdt ETSO/7]
ETSO-C170 sets requirements for HF radio transceiver equipment operating within 1.5 to 30 MHz, mandating RTCA DO-163 as the minimum performance standard and classifying function failure as minor.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...