ED Decision 2022/018/R
1 Applicability
This ETSO provides the requirements that Ground-Based Augmentation System Very High Frequency Data Broadcast Equipment that is designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
The applicable procedures are detailed in CS-ETSO, Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
The applicable standards are those provided in RTCA document DO-253D, Change 1, ‘Minimum Operational Performance Standards for GPS Local Area Augmentation System Airborne Equipment’, dated 27 June 2019.
Note: All RTCA/DO-253D Change 1 references to RTCA/DO 246() apply to RTCA/DO-246E, including Change 1, ‘GNSS-Based Precision Approach Local Area Augmentation System (LAAS) Signal-In-Space Interface Control Document (ICD)’.
3.1.2 Environmental Standard
See CS-ETSO, Subpart A, paragraph 2.1.
3.1.3 Software
See CS-ETSO, Subpart A, paragraph 2.2.
3.1.4 Airborne Electronic Hardware
See CS-ETSO, Subpart A, paragraph 2.3.
3.2 Specific
3.2.1 Failure Condition Classification
See CS-ETSO, Subpart A, paragraph 2.4.
4 Marking
4.1 General
See CS-ETSO, Subpart A, paragraph 1.2.
4.2 Specific
None.
5 Availability of Referenced Documents
See CS-ETSO, Subpart A, paragraph 3.
[Amdt ETSO/7]
ETSO-C162b requires Ground-Based Augmentation System Very High Frequency Data Broadcast Equipment to meet RTCA DO-253D Change 1 and follow CS-ETSO Subpart A procedures for environmental, software, hardware, failure, and,
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...