ED Decision 2003/10/RM
1 Applicability
This ETSO gives the requirements which overspeed warning instruments, that are manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in the Society of Automotive Engineers, Inc., (SAE) Aerospace Standard (AS) 8007 „Overspeed Warning Instruments“ dated February 1978.
3.1.2 Environmental Standard
See CS-ETSO Subpart A paragraph 2.1
3.1.3 Computer Software
See CS-ETSO Subpart A paragraph 2.2
3.2 Specific
None.
4 Marking
4.1 General
Marking is detailed in CS-ETSO Subpart A paragraph 1.2.
4.2 Specific
None.
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3.
Loading collections...