ED Decision 2016/013/R
1 Applicability
This ETSO provides the requirements which Aviation Child Safety Devices (ACSD) that are designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO, Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in the SAE AS5276/1, Performance Standard for Child Restraint Systems in Transport Category Airplanes, dated 11/1/2000, as amended by Appendix 1 to this ETSO.
3.1.2 Environmental Standard
See CS-ETSO, Subpart A, paragraph 2.1.
3.1.3 Computer Software
None.
3.1.4 Electronic Hardware Qualification
None.
3.2 Specific
None.
3.2.1 Failure Condition Classification
4 Marking
4.1 General
Marking as detailed in CS-ETSO, Subpart A, paragraph 1.2.
4.2 Specific
In addition, the ACSD shall be marked with the ACSD type designation (reference SAE AS52761, paragraph 2.5, as amended by Appendix 1).
Also, any applicable limitations or restrictions shall be marked to allow aircraft-specific or operational-specific installation limitations, such as: ’FOR USE ON [insert aircraft type or serial number] ONLY’; ‘FOR USE ON AIRCRAFT USED IN PART [insert number] OPERATIONS ONLY’; ‘FOR MILITARY USE ONLY’; or ‘SEE DRAWING NO. [insert number] FOR INSTALLATION LIMITATIONS.’
5 Availability of Referenced Document
See CS-ETSO, Subpart A, paragraph 3.
[Amdt ETSO/11]
ETSO-C100c requires Aviation Child Safety Devices designed and manufactured on or after its date to meet SAE AS5276/1 performance standards and specific marking for type and installation limitations.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...