ED Decision 2003/10/RM
1 Applicability
This ETSO gives the requirements which individual flotation devices that are manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in the attached Federal Aviation Administration Standard „Individual Flotation Devices“.
Where applicable, instead of the referenced FAA documents/paragraph the corresponding IR, CS or ETSO document/paragraph shall be used, when available.
3.1.2 Environmental Standard
As given in the FAA Standard.
3.1.3 Computer Software
None
3.2 Specific
None
4 Marking
4.1 General
Marking is detailed in CS-ETSO Subpart A paragraph 1.2.
4.2 Specific
None.
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3.
Loading collections...