Navigate / EASA
Ask question Discover more Add to collection

ETSO-2C93b

ED Decision 2003/10/RM
Airborne Interim Standard Microwave Landing System Converter Equipment

1 Applicability

This ETSO gives the requirements which airborne interim standard microwave landing system converter equipment that is manufactured on or after the date of this ETSO must meet, in order to be identified with the applicable ETSO marking.

2 Procedures

2.1 General

Applicable procedures are detailed in CS-ETSO Subpart A.

2.2 Specific

None.

3 Technical Conditions

3.1 Basic

3.1.1 Minimum Performance Standard

Standards set forth in the EUROCAE document ED 36A, „MOPS for Microwave Landing System (MLS) Airborne Receiving Equipment“, dated February 1995.

3.1.2 Environmental Standard

See CS-ETSO Subpart A paragraph 2.1

3.1.3 Computer Software

See CS-ETSO Subpart A paragraph 2.2

3.2 Specific

None.

4 Marking

4.1 General

Marking is detailed in CS-ETSO Subpart A.

4.2 Specific

None.

5 Availability of Referenced Document

See CS-ETSO Subpart A paragraph 3.
Details
Source-Title: ETSO-2C93b View latest amendments
Erulesid: ERULES-1963177438-7171 Compare versions
Domain: Initial airworthiness
Amendedby: Initial issue
Applicabilitydate: 24 October, 2003
Entryintoforcedate: 24 October, 2003
Regulatorysource: ED Decision 2003/10/RM Navigate
Regulatorysubject: CS-ETSO
Typeofcontent: CS (Certification specification)
Origin: EASA
Category: EAR
Contact support