ED Decision 2006/004/R
1 Applicability
This ETSO gives the requirements which immersion suits for use on helicopters operating to or from helidecks located in a hostile sea area (as defined in JAR-OPS 3.480(a)(12)(ii)(a)), that are manufactured on or after the date of this ETSO, must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
This ETSO and the appendices refer to JAR-OPS 3 at Amendment 2 dated 1 January 2002.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in Appendix 1 to this ETSO.
3.1.2 Environmental Standard
None.
3.2 Specific
None.
4 Marking
4.1 General
Marking is detailed in CS-ETSO Subpart A paragraph 1.2.
4.2 Specific
As given in Appendix 1.
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3.
EN documents may be purchased from the European Committee for Standardisation (CEN), Rue de Stassart 36, B-1050 Brussels, Belgium or any CEN member.
JAA documents may be purchased through Information Handling Services. Addresses of the worldwide IHS offices are listed on the JAA website (www.jaa.nl) and IHS’s website (www.global.ihs.com)
[Amdt ETSO/1]
Loading collections...