What is the applicability condition for multi-mode receivers to be identified with ETSO marking?

They must be manufactured on or after the date of this ETSO.

ETSO-2C500a

Q: What environmental standard applies to multi-mode receivers under ETSO-2C500a?

See CS-ETSO Subpart A paragraph 2.1.

Q: What minimum performance standard must a multi-mode receiver (ILS/MLS/GPS) meet to be eligible for ETSO marking?

The standards set forth in EUROCAE document ED-88 dated August 1997.

Q: What computer software requirements apply to multi-mode receivers under ETSO-2C500a?

See CS-ETSO Subpart A paragraph 2.2.

Q: Where is the marking requirement for ETSO-2C500a specified?

In CS-ETSO Subpart A paragraph 1.2.

Navigate / EASA

Ask question Discover more Add to collection

ETSO-2C500a

ED Decision 2003/10/RM

Multi-mode Receiver (ILS/MLS/GPS)

1 Applicability

This ETSO gives the requirements which multi-mode receivers (ILS/MLS/GPS) that are manufactured on or after the date of this ETSO must meet in order to be identified with applicable ETSO marking.

2 Procedures

2.1 General

Applicable procedures are detailed in CS-ETSO Subpart A.

2.2 Specific

None.

3 Technical Conditions

3.1 Basic

3.1.1 Minimum Performance Standard

Standards set forth in EUROCAE document ED-88 dated August 1997.

3.1.2 Environmental Standard

See CS-ETSO Subpart A paragraph 2.1

3.1.3 Computer Software

See CS-ETSO Subpart A paragraph 2.2

3.2 Specific

None

4 Marking

4.1 General

Marking is detailed in CS-ETSO Subpart A paragraph 1.2

4.2 Specific

None.

5 Availability of Referenced Document

See CS-ETSO Subpart A paragraph 3.

Details

Source-Title: ETSO-2C500a View latest amendments

Erulesid: ERULES-1963177438-7199 Compare versions

Domain: Initial airworthiness

Amendedby: Initial issue

Applicabilitydate: 24 October, 2003

Entryintoforcedate: 24 October, 2003

Regulatorysource: ED Decision 2003/10/RM Navigate

Regulatorysubject: CS-ETSO

Typeofcontent: CS (Certification specification)

Origin: EASA

Category: EAR