Navigate / EASA

CS ACNS.D.ADSB.020 ADS-B Out Data Parameters

ED Decision 2013/031/R

(See AMC1 ACNS.D.ADSB.020(a-b))

(a)     The ADS-B Out system provides the following minimum set of data parameters:

(1)     Aircraft Identification;

(2)     Mode A Code;

(3)     ICAO 24-bit aircraft address;

(4a)    Airborne Horizontal Position — Latitude and Longitude;

(4b)    Airborne Navigation Integrity Category: NIC;

(4c)    Airborne/Surface Navigation Accuracy Category for Position: NACp;

(4d)    Airborne/Surface Source Integrity Level: SIL;

(4e)    Airborne/Surface System Design Assurance: SDA;

(5)     Pressure Altitude (incl. NICbaro);

(6)     Special Position Identification (SPI);

(7a)    Emergency Status;

(7b)    Emergency Indication;

(8)     1090 ES Version Number;

(9a)    Airborne velocity over Ground — (East/West and North/South);

(9b)    Airborne/Surface Navigation Accuracy Category for Velocity: NACv;

(10)    Emitter Category;

(11)    Vertical Rate;

(12a)  Surface Horizontal Position — Latitude and Longitude;

(12b)  Surface Navigation Integrity Category: NIC;

(13)    Surface Ground Track;

(14)    Movement (surface ground speed);

(15)    Length/width of Aircraft;

(16)    GPS Antenna Longitudinal Offset;

(17a)  Geometric Altitude; and

(17b)  Geometric Altitude Quality: GVA.

(b)     Where available in a suitable format, the ADS-B Out system provides the following data parameters:

(1)     Selected Altitude;

(2)     Barometric Pressure Setting; and

(3)     ACAS Resolution Advisory.