Browse all sections of CS-31HB Amdt 1 - Hot Air Balloons (Dec 2011)

• CS 31HB.82 Instructions for continued airworthiness
• AMC 31HB.82(d)(6) Instructions for continued airworthiness
• CS 31HB.37 Fasteners
• CS 31HB.47 Heater system
• CS 31HB.39 Protection of parts
• AMC 31HB.55(b) Rapid deflation means
• CS 31HB.72 Miscellaneous equipment
• AMC 31HB.82(d)(1) Instructions for continued airworthiness
• CS-31HB Book 1 Certification specifications
• CS 31HB.35 Fabrication methods
• AMC 31HB.63(a) Occupant restraint
• AMC 31HB.27(g) Strength and proof of strength
• CS-31HB Book 2 Acceptable Means of Compliance
• AMC 31HB.28(c) Tethered flight loads
• CS 31HB.67 Tethered flight
• AMC 31HB.47(c)(2) Minimum equipment
• AMC 31HB.44 Protection of envelope against tearing
• AMC 31HB.45(a) Fuel cells
• CS 31HB.30 Restraint harness
• CS 31HB.2 Definitions
• AMC 31HB.59(l) Baskets
• AMC 31HB.14(a) Mass limits
• CS 31HB.14 Mass limits
• AMC 31HB.47(f) Heater system
• CS 31HB.17 Performance: climb
• AMC 31HB.43(c) Fitting factors
• AMC 31HB.25 Factors of safety
• AMC 31HB.46(a) Pressurised fuel systems
• AMC 31HB.51 Disposable ballast
• CS 31HB.21 Loads
• AMC SUBPART G - OPERATING LIMITITATIONS AND INFORMATION
• AMC 31HB.37 Fasteners
• CS 31HB.46 Pressurised fuel systems
• AMC 31HB.45(d)(1) Fuel cells
• AMC 31HB.81(c) General
• CS 31HB.71 Function and installation
• CS 31HB.63 Occupant restraint
• AMC 31HB.72(a)(4) Miscellaneous equipment
• CS 31HB.16 Empty mass
• SUBPART D – DESIGN AND CONSTRUCTION
• AMC 31HB.33(a)(2) Materials
• AMC SUBPART B – FLIGHT
• CS 31HB.28 Tethered flight loads
• SUBPART C – STRUCTURE
• AMC 31HB.67 Tethered flight
• CS 31HB.33 Materials
• CS 31HB.1 Applicability
• CS 31HB.25 Factors of safety
• AMC 31HB.27(e) Strength and proof of strength
• AMC 31HB.57(c) Control cords
• AMC 31HB.35 Fabrication methods
• CS 31HB.55 Rapid deflation means
• AMC 31HB.82(d)(5) Instructions for continued airworthiness
• SUBPART B – FLIGHT
• AMC 31HB.59(f) Baskets
• CS 31HB.57 Control cords
• AMC 31HB.59(e) Baskets
• CS 31HB.27 Strength and proof of strength
• AMC 31HB.59(a) Baskets
• AMC 31HB.82(c) Instructions for continued airworthiness
• AMC 31HB.55(a) Rapid deflation means
• AMC SUBPART F - EQUIPMENT
• CS 31HB.12 Proof of compliance
• CS 31HB.31 General
• CS 31HB.53 Drag rope
• AMC 31HB.14(b) Mass limits
• AMC 31HB.46(e) Pressurised fuel systems
• CS 31HB.20 Controllability
• AMC 31HB.45(d)(5) Fuel cells
• CS 31HB.23 Load factors
• CS 31HB.43 Fitting factor
• SUBPART F – EQUIPMENT
• CS 31HB.45 Fuel cells
• CS 31HB.49 Control systems
• AMC SUBPART D - DESIGN AND CONSTRUCTION
• AMC 31HB.81 General
• CS 31HB.51 Disposable ballast
• AMC 31HB.59(c) Baskets
• AMC 31HB.27(d) Strength and proof of strength
• AMC 31HB.71(a)(4) Function and installation
• SUBPART G – OPERATING LIMITATIONS AND INFORMATION
• SUBPART A – GENERAL
• AMC 31HB.27(c) Strength and proof of strength
• AMC 31HB.27 Strength and proof of strength
• AMC 31HB.47(c)(3) Heater system
• AMC 31HB.28(a) Tethered flight loads
• AMC 31HB.81(b)(2) General
• AMC 31HB.49(e) Control systems
• AMC SUBPART C – STRUCTURE
• AMC 31HB.59(h) Baskets
• AMC 31HB.16 Empty mass
• AMC 31HB.47(c)(1) Heater system
• AMC 31HB.46(b) Pressurised fuel systems
• CS 31HB.59 Baskets
• AMC 31HB.45(c) Fuel cells
• CS 31HB.44 Protection of envelope against tearing
• CS 31HB.41 Inspection provisions
• AMC 31HB.39 Protection of parts
• AMC 31HB.17 Performance: climb
• CS 31HB.81 Operating instructions
• AMC 31HB.82(d)(9) Instructions for continued airworthiness