CS 27.549 Fuselage,
landing gear, and rotor pylon structures
ED Decision 2023/001/R
(a) Each fuselage, landing gear, and rotor pylon structure must be designed as prescribed in this paragraph. Resultant rotor forces may be represented as a single force applied at the rotor hub attachment point.
(b) Each structure must be designed to withstand:
(1) The critical loads prescribed in CS 27.337 to 27.341 and CS 27.351;
(2) The applicable ground loads prescribed in CS 27.235, 27.471 to 27.485, CS 27.493, 27.497, 27.501, 27.505, and 27.521; and
(3) The loads prescribed in CS 27.547(c)(2) and (d).
(c) Auxiliary rotor thrust, and the balancing air and inertia loads occurring under accelerated flight conditions, must be considered.
(d) Each engine mount and adjacent fuselage structure must be designed to withstand the loads occuring under accelerated flight and landing conditions, including engine torque.
[Amdt 27/3]
Loading collections...