Navigate / EASA
AMC1 ORA.ATO.230(b) Training manual and operations manual

ED Decision 2025/002/R

ALL ATOs, EXCEPT THOSE PROVIDING FLIGHT TEST TRAINING

OPERATIONS MANUAL

The operations manual for use at an ATO conducting integrated or modular flight training courses should include the following:

(a) General:

(1) a list and description of all volumes in the operations manual;

(2) administration (function and management);

(3) responsibilities (all management and administrative staff);

(4) student discipline and disciplinary action;

(5) approval or authorisation of flights;

(6) preparation of flying programme (restriction of numbers of aircraft in poor weather);

(7) command of aircraft;

(8) responsibilities of the PIC;

(9) carriage of passengers;

(10) aircraft documentation;

(11) retention of documents;

(12) flight crew qualification records (licences and ratings);

(13) revalidation (medical certificates and ratings);

(14) flight duty period and flight time limitations (flying instructors);

(15) flight duty period and flight time limitations (students);

(16) rest periods (flight instructors);

(17) rest periods (students);

(18) pilots’ log books;

(19) flight planning (general);

(20) safety (general): equipment, radio listening watch, hazards, accidents and incidents (including reports), safety pilots etc..

(b) Technical:

(1) aircraft descriptive notes;

(2) aircraft handling (including checklists, limitations, maintenance and technical logs, in accordance with relevant requirements, etc.);

(3) emergency procedures;

(4) radio and radio navigation aids;

(5) allowable deficiencies (based on the master minimum equipment list (MMEL), if available).

(c) Route:

(1) performance (legislation, take-off, route, landing etc.);

(2) flight planning (fuel, oil, minimum safe altitude, navigation equipment etc.);

(3) loading (load sheets, mass, balance and limitations);

(4) weather minima (flying instructors);

(5) weather minima (students – at various stages of training);

(6) training routes or areas.

(d) Personnel training

(1) appointments of persons responsible for standards/competence of flight personnel;

(2) initial training;

(3) refresher training;

(4) standardisation training;

(5) checks to verify that training personnel is proficient with regard to all internal ATO standards, processes and procedures;

(6) upgrading training;

(7) ATO personnel standards evaluation.