GM1 ATM/ANS.EQMT.CERT.025(e) Demonstration of compliance with the
ATM/ANS equipment certification basis
ED Decision 2024/001/R
DECLARATION AT THE END OF COMPLIANCE DEMONSTRATION
Upon completion of all compliance-demonstration activities, the DPO will provide a final declaration indicating that all compliance-demonstration activities have been performed in accordance with the certification programme. This declaration will be provided in the form of a document signed by the DPO accountable manager. The document will typically contain the following:
— a description of the final equipment configuration;
— a statement confirming the completion of all compliance-demonstration activities that are performed in accordance with the certification programme as accepted by the Agency;
— a list of all the applicable life cycle data that supports the demonstration of compliance;
— a list of the applicable deviations;
— a list of the applicable limitations;
— a declaration that:
— it has demonstrated compliance with the certification basis, as established and notified by the Agency;
— no feature or characteristic has been identified that may render the ATM/ANS equipment unsuitable for its intended use; and
— the features, characteristics or functions that do not form part of the certification basis have no interference or detrimental effect on the suitability of the ATM/ANS equipment for its intended use.
EASA ATM/ANS Equipment Certification Summary: Equipment certification requires a final declaration from the DPO accountable manager after compliance demonstration. This declaration confirms completion of activities per the certification program, describes the final configuration, lists supporting data, deviations, and limitations. It asserts compliance with the certification basis and suitability for intended use, ensuring non-certified features don't negatively impact performance.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...