ATM/ANS.EQMT.CERT.025 Demonstration of compliance with the ATM/ANS
equipment certification basis
Regulation (EU) 2023/1768
(a) An applicant shall, following the acceptance of the certification programme by the Agency, demonstrate compliance with the ATM/ANS equipment certification basis as established and notified to the applicant by the Agency in accordance with point ATM/ANS.EQMT.AR.B.001, and shall provide the Agency with the means by which such compliance has been demonstrated.
(b) An applicant for an ATM/ANS equipment certificate shall update the certification programme with the updated certification basis in case the Agency identifies the need for the applicant to do so following the initial submission established in accordance with point ATM/ANS.EQMT.CERT.015.
(c) An applicant shall report to the Agency any difficulty or event encountered during the process of demonstration of compliance that may have an appreciable effect on the assessment under point ATM/ANS.EQMT.CERT.015(b)(2)(vi) or on the certification programme or may otherwise require a change to the level of involvement of the Agency previously notified to the applicant in accordance with point ATM/ANS.EQMT.AR.B.010(b).
(d) An applicant shall record demonstrations of compliance within the compliance documents as referred to in the certification programme.
(e) Upon completion of all compliance-demonstration activities in accordance with the certification programme, including any inspections and tests carried out in accordance with point ATM/ANS.EQMT.CERT.040, an applicant shall declare and submit in a form and manner established by the Agency that:
(1) it has demonstrated compliance with the certification basis, as established and notified by the Agency, following the certification programme as accepted by the Agency in accordance with point (a);
(2) no feature or characteristic has been identified that may render the ATM/ANS equipment unsuitable for its intended use.
(f) The applicant shall demonstrate that the features, characteristics or functions that do not form part of the certification basis have no interference or detrimental effect on the suitability of the ATM/ANS equipment for its intended use.
EASA ATM/ANS Equipment Certification Compliance: Applicants must demonstrate compliance with the certification basis defined by EASA, providing evidence and updating programs as needed. Any difficulties impacting assessment or requiring EASA involvement must be reported. Upon completion, a declaration confirming compliance and suitability for intended use is required. Non-certified features must not negatively impact equipment suitability.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...