AMC2 Article 6(1)
Statement of compliance
ED Decision 2023/016/R
ISSUE
(a) The SoC should contain the following information:
— a brief description, identification and scope of the ATM/ANS equipment;
— the Regulation reference requiring the issue of the SoC[19];
— the name and address of the certified, in accordance with Regulation (EU) 2017/373, ATM/ANS provider, where the ATM/ANS equipment will be deployed or on its behalf, the trade name and full address of the DPO approved in accordance with Regulation (EU) 2023/1769 issuing the SoC;
— the reference to the detailed specifications adopted by EASA in accordance with Article 76(3) of Regulation (EU) 2018/1139, as far as applicable, for the intended use, and any deviations therefrom;
— deviations;
— remarks;
— limitations;
— conditions;
— date and version;
— identification of the signatory.
(b) The SoC should be accompanied by all documents that form the basis for the issuance of it and, when issued by an approved DPO, an EASA release form issued in accordance with DPO.OR.C.001(d) of Commission Implementing Regulation (EU) 2023/1769 by the same DPO.
[19] Note:
For ATM/ANS equipment subject to statement of compliance, Article 6 of Commission Delegated Regulation (EU) 2023/1768 should be indicated.
During the transition period (until 13 September 2028), for ATM/ANS equipment subject to certification and declaration in accordance with Articles 4 and 5 respectively, a reference to Article 7(3) of Commission Delegated Regulation (EU) 2023/1768 should be indicated.
ATM/ANS equipment compliance requires a Statement of Compliance (SoC). This statement must detail equipment description, regulations, provider information, applicable specifications (including deviations), compliance procedures, limitations, and signatory details. The SoC needs supporting documentation and, if issued by an approved DPO, an EASA release form.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...