Navigate / EASA

ED Decision 2023/011/R

SUBJECT 8: EQUIPMENT AND SYSTEMS

The subject objective is:

Learners shall integrate knowledge and understanding of the basic working principles of equipment and systems, and comply with the equipment and system degradation procedures in the provision of ATS.

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC EQPS 1 — VOICE COMMUNICATIONS

Subtopic EQPS 1.1 — Radio communications

APS
EQPS

1.1.1

Operate two-way communication equipment.

3

Transmit/receive switches, procedures

Optional content: frequency selection, standby equipment

ALL

APS
EQPS

1.1.2

Identify indications of operational status of radio equipment.

3

Optional content: indicator lights, serviceability displays, selector/frequency displays

ALL

APS
EQPS

1.1.3

Consider radio range.

2

Optional content: transfer to another frequency, apparent radio failure, failure to establish radio contact, frequency protection range

APP ACP APS ACS

Subtopic EQPS 1.2 — Other voice communications

APS
EQPS

1.2.1

Operate landline communications.

3

Optional content: telephone, interphone and intercom equipment

ALL

 

TOPIC EQPS 2 — AUTOMATION IN ATS

Subtopic EQPS 2.1 — Aeronautical fixed telecommunication network (AFTN)

APS
EQPS

2.1.1

Decode AFTN messages.

3

Optional content: movement and control messages, NOTAMs, SNOWTAMs, BIRDTAMs, etc.

ALL

Subtopic EQPS 2.2 — Automatic data interchange

APS
EQPS

2.2.1

Use automatic data transfer equipment where available.

3

Optional content: sequencing systems, automated information and coordination, OLDI

ADV ADI APS ACS

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC EQPS 2 — AUTOMATION IN ATS

Subtopic EQPS 2.1 — Aeronautical fixed telecommunication network (AFTN)

APS
EQPS

2.1.1

Decode AFTN messages.

3

Optional content: movement and control messages, NOTAMs, SNOWTAMs, BIRDTAMs, etc.

ALL

Subtopic EQPS 2.2 — Automatic data interchange

APS
EQPS

2.2.1

Use automatic data transfer equipment where available.

3

Optional content: sequencing systems, automated information and coordination, OLDI

ADC APS ACS

[applicable from 4 August 2024 - ED Decision 2023/011/R]

TOPIC EQPS 3 — CONTROLLER WORKING POSITION

Subtopic EQPS 3.1 — Operation and monitoring of equipment

APS
EQPS

3.1.1

Monitor the technical integrity of the controller working position.

3

Notification procedures, responsibilities

ALL

APS
EQPS

3.1.2

Operate the equipment of the controller working position.

3

Optional content: situation displays, flight progress board, flight data display, radio, telephone, maps and charts, strip-printer, clock, information systems, UDF/VDF

ALL

APS
EQPS

3.1.3

Operate available equipment in abnormal and emergency situations.

3

ALL

Subtopic EQPS 3.2 — Situation displays and information systems

APS
EQPS

3.2.1

Use situation displays.

3

ALL

APS
EQPS

3.2.2

Check availability of information.

3

ALL

APS
EQPS

3.2.3

Obtain information from equipment.

3

APP ACP APS ACS

Subtopic EQPS 3.3 — Flight data systems

APS
EQPS

3.3.1

Use the flight data information at controller working position.

3

ALL

Subtopic EQPS 3.4 — Use of ATS surveillance system

APS
EQPS

3.4.1

Use the ATS surveillance system functions.

3

APS ACS

APS
EQPS

3.4.2

Analyse the information provided by the ATS surveillance system.

4

APS ACS

APS
EQPS

3.4.3

Assign codes.

4

APS ACS

APS
EQPS

3.4.4

Appreciate the use of advanced surveillance technology.

3

Optional content: Mode S, ADS-B, MLAT

APS ACS

Subtopic EQPS 3.5 — Advanced systems

APS
EQPS

3.5.1

Appreciate the use of controller–pilot data link communications when available.

3

APS ACS

APS
EQPS

3.5.2

Appreciate the use of information provided by advanced systems.

3

Optional content: trajectory-based information, MTCD, MONA, etc.

APS ACS

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC EQPS 3 — CONTROLLER WORKING POSITION

Subtopic EQPS 3.1 — Operation and monitoring of equipment

APS
EQPS

3.1.1

Monitor the technical integrity of the controller working position.

3

Notification procedures, responsibilities

ALL

APS
EQPS

3.1.2

Operate the equipment of the controller working position.

3

Optional content: situation displays, flight progress board, flight data display, radio, telephone, maps and charts, strip-printer, clock, information systems, UDF/VDF

ALL

APS
EQPS

3.1.3

Operate the available equipment in abnormal and emergency situations.

3

ALL

Subtopic EQPS 3.2 — Situation displays and information systems

APS
EQPS

3.2.1

Use situation displays.

3

ALL

APS
EQPS

3.2.2

Check the availability of information.

3

ALL

APS
EQPS

3.2.3

Obtain information from equipment.

3

APP ACP APS ACS

Subtopic EQPS 3.3 — Flight data systems

APS
EQPS

3.3.1

Use the flight data information at the controller working position.

3

ALL

Subtopic EQPS 3.4 — Use of the ATS surveillance system

APS
EQPS

3.4.1

Use the ATS surveillance system functions.

3

APS ACS

APS
EQPS

3.4.2

Analyse the information provided by the ATS surveillance system.

4

APS ACS

APS
EQPS

3.4.3

Assign codes.

4

APS ACS

APS
EQPS

3.4.4

Appreciate the use of advanced surveillance technology.

3

Optional content: Mode S, ADS-B, MLAT

APS ACS

Subtopic EQPS 3.5 — Advanced systems

APS
EQPS

3.5.1

Appreciate the use of controller–pilot data link communications when available.

3

APS ACS

APS
EQPS

3.5.2

Characterise the use of information provided by advanced systems.

2

MTCD, AMAN, DMAN

Optional content: trajectory-based information, MONA, etc.

APS ACS

[applicable from 4 August 2024 - ED Decision 2023/011/R]

TOPIC EQPS 4 — FUTURE EQUIPMENT

Subtopic EQPS 4.1 — New developments

APS
EQPS

4.1.1

Recognise future developments.

1

New advanced systems

ALL

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC EQPS 4 — FUTURE EQUIPMENT

Subtopic EQPS 4.1 — New developments

APS
EQPS

4.1.1

Recognise future developments.

1

New advanced systems

Optional content: European ATM Master Plan, European Plan for Aviation Safety

ALL

[applicable from 4 August 2024 - ED Decision 2023/011/R]

TOPIC EQPS 5 — EQUIPMENT AND SYSTEMS’ LIMITATIONS AND DEGRADATION

Subtopic EQPS 5.1 — Reaction to limitations

APS
EQPS

5.1.1

Take account of the limitations of equipment and systems.

2

ALL

APS
EQPS

5.1.2

Respond to technical deficiencies of the operational position.

3

Notification procedures, responsibilities

ALL

Subtopic EQPS 5.2 — Communication equipment degradation

APS
EQPS

5.2.1

Identify that communication equipment has degraded.

3

Optional content: ground–air and landline communications

APP ACP APS ACS

APS
EQPS

5.2.2

Apply contingency procedures in the event of communication equipment degradation.

3

Optional content: procedures for total or partial degradation of ground–air and landline communications, alternative methods of transferring data

APP ACP APS ACS

Subtopic EQPS 5.3 — Navigational equipment degradation

APS
EQPS

5.3.1

Identify when a navigational equipment failure will affect operational ability.

3

Optional content: VOR, navigational aids

ALL

APS
EQPS

5.3.2

Apply contingency procedures in the event of a navigational equipment degradation.

3

Optional content: vertical separation, information to aircraft, navigational assistance, seeking assistance from adjacent units

ADI APP ACP APS ACS

Subtopic EQPS 5.4 — Surveillance equipment degradation

APS
EQPS

5.4.1

Identify that surveillance equipment has degraded.

3

Partial power failure, loss of certain facilities, total failure

APS ACS

APS
EQPS

5.4.2

Apply contingency procedures in the event of surveillance equipment degradation.

3

Optional content: inform adjacent sectors, inform aircraft, apply vertical separation (emergency), increased horizontal separation, reduce the number of aircraft entering area of responsibility, transfer aircraft to another unit

APS ACS

Subtopic EQPS 5.5 — ATC processing system degradation

APS
EQPS

5.5.1

Identify a processing system degradation.

3

Optional content: FDPS, SDPS, software processing of situation display

APS ACS

APS
EQPS

5.5.2

Apply contingency procedures in the event of a processing system degradation.

3

APS ACS

[applicable until 3 August 2024 - ED Decision 2019/023/R]

TOPIC EQPS 5 — EQUIPMENT AND SYSTEMS’ LIMITATIONS AND DEGRADATION

Subtopic EQPS 5.1 — Reaction to limitations

APS
EQPS

5.1.1

Take account of the limitations of equipment and systems.

2

ALL

APS
EQPS

5.1.2

Respond to technical deficiencies of the operational position.

3

Notification procedures, responsibilities

ALL

Subtopic EQPS 5.2 — Communication equipment degradation

APS
EQPS

5.2.1

Identify that communication equipment has degraded.

3

Optional content: ground–air and landline communications

APP ACP APS ACS

APS
EQPS

5.2.2

Apply contingency procedures in the event of communication equipment degradation.

3

Optional content: procedures for total or partial degradation of ground–air and landline communications, alternative methods of transferring data

ALL

Subtopic EQPS 5.3 — Navigational equipment degradation

APS
EQPS

5.3.1

Identify when a navigational equipment failure will affect operational ability.

3

Optional content: navigational aids, ‘European GNSS Contingency/Reversion Handbook for PBN Operations’

ALL

APS
EQPS

5.3.2

Apply contingency procedures in the event of a navigational equipment degradation.

3

Optional content: vertical separation, information to aircraft, navigational assistance, seeking assistance from adjacent units

ALL

Subtopic EQPS 5.4 — Surveillance equipment degradation

APS
EQPS

5.4.1

Identify that surveillance equipment has degraded.

3

Partial power failure, loss of certain facilities, total failure

APS ACS

APS
EQPS

5.4.2

Apply contingency procedures in the event of surveillance equipment degradation.

3

Optional content: inform adjacent sectors, inform aircraft, apply vertical separation (emergency), increased horizontal separation, reduce the number of aircraft entering area of responsibility, transfer aircraft to another unit

APS ACS

Subtopic EQPS 5.5 — ATC processing system degradation

APS
EQPS

5.5.1

Identify processing system degradation.

3

Optional content: FDPS, SDPS, software processing of situation display

APS ACS

APS
EQPS

5.5.2

Apply contingency procedures in the event of processing system degradation.

3

APS ACS

[applicable from 4 August 2024 - ED Decision 2023/011/R]

Contact support