How should an item in the MEL that requires an operational or maintenance procedure be identified?

Any item in the MEL requiring an operational or maintenance procedure should be identified in the 'remarks' or 'exceptions' column/part/section of the MEL.

What does the notation '(M)' in the MEL indicate?

'(M)' indicates that a maintenance procedure is required.

What does the notation '(O)' in the MEL indicate?

'(O)' indicates that an operational procedure is required.

AMC1 ORO.MLR.105(g) Minimum equipment list

Q: Can an operator develop modified procedures instead of using the MMEL procedures directly, and under what condition?

Yes, modified procedures may be developed by the operator when they provide the same level of safety as required by the MMEL.

Q: Who is responsible for providing appropriate operational and maintenance procedures referenced in the MEL, regardless of who developed them?

The operator is responsible for providing appropriate operational and maintenance procedures referenced in the MEL, regardless of who developed them.

Q: Who is responsible for the satisfactory accomplishment of all procedures, regardless of who performs them?

The operator is responsible for the satisfactory accomplishment of all procedures, regardless of who performs them.

Navigate / EASA

Ask question Discover more Add to collection

AMC1 ORO.MLR.105(g) Minimum equipment list

ED Decision 2017/007/R

OPERATIONAL AND MAINTENANCE PROCEDURES

(a) The operational and maintenance procedures referenced in the MEL should be based on the operational and maintenance procedures referenced in the MMEL. Modified procedures may, however, be developed by the operator when they provide the same level of safety, as required by the MMEL. Modified maintenance procedures should be developed in accordance with Commission Regulation (EU) No 1321/2014.

(b) Providing appropriate operational and maintenance procedures referenced in the MEL, regardless of who developed them, is the responsibility of the operator.

(c) Any item in the MEL requiring an operational or maintenance procedure to ensure an acceptable level of safety should be so identified in the ‘remarks’ or ’exceptions’ column/part/section of the MEL. This will normally be ‘(O)’ for an operational procedure, or ‘(M)’ for a maintenance procedure. ‘(O)(M)’ means both operational and maintenance procedures are required.

(d) The satisfactory accomplishment of all procedures, regardless of who performs them, is the responsibility of the operator.

Details

Source-Title: AMC1 ORO.MLR.105(g) Minimum equipment list View latest amendments

Erulesid: ERULES-1963177438-12054 Compare versions

Domain: Air operations

Applicabilitydate: 31 March, 2017

Entryintoforcedate: 31 March, 2017

Regulatorysource: ED Decision 2017/007/R Navigate

Regulatorysubject: Part-ORO

Typeofcontent: AMC to IR (Acceptable means of compliance to implementing rule)

Parentir: ORO.MLR.105 Minimum equipment list

Origin: EASA

Category: EAR