21.A.126 Production inspection system
Regulation
(EU) 2022/201
(a) The production inspection
system required under point 21.A.125A(a)
shall provide a means for determining that:
1. incoming materials, and bought or
subcontracted parts, used in the finished product are as specified in the
applicable design data;
2. incoming materials, and bought or
subcontracted parts, are properly identified;
3. processes, manufacturing techniques and
methods of assembly affecting the quality and safety of the finished product
are accomplished in accordance with specifications accepted by the competent
authority;
4. design changes, including material
substitutions, have been approved under Subpart D or E and controlled before
being incorporated in the finished product.
(b) The production inspection
system required by point 21.A.125A(a),
shall also be such as to ensure that:
1. parts in process are inspected for
conformity with the applicable design data at points in production where
accurate determinations can be made;
2. materials subject to damage and
deterioration are suitably stored and adequately protected;
3. current design drawings are readily
available to manufacturing and inspection personnel, and used when necessary;
4. rejected materials and parts are
segregated and identified in a manner that precludes installation in the
finished product;
Loading collections...